Journal

 

2018

RIA

  1.  Shah, H.N.M.,  Sulaiman, M.,  Shukor, A.Z.,  Kamis, Z.,  Rahman, A.A. , Butt welding joints recognition and location identification by using local thresholding, 2018. Robotics and Computer-Integrated Manufacturing, 51, pp. 181-188.
  2. Ramli L., Mohamed Z., Jaafar H.I., A neural network-based input shaping for swing suppression of an overhead crane under payload hoisting and mass variations, 2018. Mechanical Systems and Signal Processing, 107, pp. 484-501.
  3. Amer N.H., Zamzuri H., Hudha K., Aparow V.R., Kadir Z.A., Abidin A.F.Z., Path tracking controller of an autonomous armoured vehicle using modified Stanley controller optimized with particle swarm optimization, 2018. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(2), 16785878.
  4. Tee S.P., Ghazaly M.M., Amran A.C., Jamaludin I.W., Experimental investigation of a passive quarter car suspension system, 2018. ARPN Journal of Engineering and Applied Sciences, 13(4), pp. 1181-1187.
  5. Yeo C.K., Ghazaly M.M., Jamaludin S.H.C.I.W., Design optimization of a three phase tubular linear switched reluctance actuator, 2018. ARPN Journal of Engineering and Applied Sciences, 13(5), pp. 1600-1607.
  6. Kadir A.M.A., Kasno M.A., Aras M.S.M., Tumari M.Z.M., Saat S., Fuzzy logic controller design for autonomous underwater vehicle (Auv)-yaw control, 2018. ARPN Journal of Engineering and Applied Sciences, 13(5), pp. 1608-1614.

 

 

EPS 

  1.  Halyani, M.Y.,  Firdaus, H.M.S.,  Zainon, M.,  Ahmad, E.Z.,  Norain, I., Modelling and simulation of a wind turbine with doubly fed induction generator in full load operation, 2018. ARPN Journal of Engineering and Applied Sciences, 13(1), pp. 57-63.
  2. Ammar N., Sulaiman M., Nor A.F.M., Long - Term load forecasting of power systems using Artificial Neural Network and ANFIS, 2018. ARPN Journal of Engineering and Applied Sciences , 13(3), pp. 828-834.
  3. Hassan E.E., Rahman T.K.A., Bahaman N., Zakaria Z., Jifri M.H., Load margin expansion for sustainable power system operation, 2018. ICT Express, 24059595.

 

 

PED 

  1.  Othman, Raja Nor Firdaus Kashfi Raja; Zuki, Nor Aishah Md; Ahmad, Suhairi Rizuan Che; Shukor, Fairul Azhar Abdul; Isa, Siti Zulaika Mat; Othman, Md Nazri, Modelling of torque and speed characterisation of double stator slotted rotor brushless DC motor, 2018. IET Electric Power Applications, 12(1), 1751-8660.
  2. Mohd Nasir N.A., bin Abdul Shukor F.A., Firdaus R.N., Wakiwaka H., Tashiro K.,c, Design of the permanent magnet linear synchronous motor for high thrust and low cogging force performance, 2018. Progress In Electromagnetics Research M, 63, pp. 83-92.
  3. Farina S., Firdaus R.N., Azhar F., Azri M., Ahmad M.S., Suhairi R., Jidin A., Sutikno T., Design and analysis of in-wheel double stator slotted rotor BLDC motor for electric bicycle application, 2018. International Journal of Power Electronics and Drive Systems, 9(1), pp. 457-464.
  4. Firdaus Kashfi Raja Othman R.N., Zuki N.A.M., Ahmad S.R.C., Shukor F.A.A., Isa S.Z.M., Sulaiman E., Zakaria Z., Torque constant density in different type of double stator permanent magnet brushless DC motor, 2018. Progress In Electromagnetics Research M, 66, pp. 127-142.

 

 

REAT 

  1.  Hussin A.S., Abdullah A.R., Jopri M.H., Sutikno T., Saad N.M., Tee W., Harmonic load diagnostic techniques and methodologies: A review, 2018. Indonesian Journal of Electrical Engineering and Computer Science, 9(3), pp. 690-695.
  2. Izzuddin, T.A.,  Jali, M.H.,  Abdullah, A.R.,  Sudirman, R., Gaze tracking algorithm using night vision camera, 2018. Indonesian Journal of Electrical Engineering and Computer Science, 9(2), pp. 438-446.
  3. Izzuddin T.A., Johari M.A., Rashid M.Z.A., Jali M.H., Smart irrigation using fuzzy logic method, 2018. ARPN Journal of Engineering and Applied Sciences, 13(2), pp. 517-522.
  4. Shen Q.J., Fahmi M., Annuar K.A.M., Efficient object isolation in complex environment using manipulation primitive on a vision based mobile 6DOF robotic arm, 2018. International Journal of Mechanical and Mechatronics Engineering, 18(1), pp. 50-56.
  5. Abdullah A.R., Rahman N.N.S.A., Saad N.M., Hashim N.M.Z., Kamaruddin A.Z., Smart localization and detection system for school children, 2018. Journal of Telecommunication, Electronic and Computer Engineering, 10(1/8), pp. 55-59.

 

 

2017

 

RIA 

  1. Yuden M.A.M., Md Ghazaly M., Amran A.C., Jamaludin I.W., Yee K.H., Yaacob M.R., Abdullah Z., Kiat Y.C., Positioning control performances of a robotic hand system, 2017. Jurnal Teknologi, 79 (1), pp. 1-23.
  2. Md Ghazaly M., Carl Choon H., Md Ali M.A., Abdullah Z., Jamaludin I.W., Kok Yew S., Yaacob M.R., Parameter analysis of a remotely controlled home monitoring system using mobile robot via camera, 2017. Jurnal Teknologi, 79 (2), pp. 81-88.
  3. Khamis A., Ghani M.R.A., Kim G.C., Kamarudin M.N., Aras M.S.M., Voltage and frequency control of microgrid systems with demand response, 2017, International Journal of Simulation: Systems, Science and Technology, 17 (41), pp. 25.1-25.6.
  4. Mohd Shah H.N., Sulaiman M., Shukor A.Z., Autonomous detection and identification of weld seam path shape position, 2017. International Journal of Advanced Manufacturing Technology, pp.1-9.
  5. Jamaludin I.W., Wahab N.A., Recursive subspace identification algorithm using the propagator based method, 2017. Indonesian Journal of Electrical Engineering and Computer Science, 6 (1), pp. 172-179.
  6. Aripin M.K., Sam Y.M., Kumeresan A.D., Che Hasan M.H., Ismail M.F., Improving transient performances of vehicle yaw rate response using composite nonlinear feedback, 2017. Journal of Theoretical and Applied Information Technology, 95 (11), pp. 2567-2576.
  7. Kasdirin H.A., Yahya N.M., Aras M.S.M., Tokhi M.O., Hybridizing invasive weed optimization with firefly algorithm for unconstrained and constrained optimization problems, 2017. Journal of Theoretical and Applied Information Technology, 95 (4), pp. 912-927.
  8. Shah H.N.M., Sulaiman M., Shukor A.Z., Rashid M.Z.A., Recognition of butt welding joints using background subtraction seam path approach for welding robot, 2017. International Journal of Mechanical and Mechatronics Engineering, 17 (1), pp. 57-62.
  9. Alandoli E.A., Rashid M.Z.A., Sulaiman M., A comparison of PID and LQR controllers for position tracking and vibration suppression of flexible link manipulator, 2017. Journal of Theoretical and Applied Information Technology, 95 (13), pp. 2949-2955.
  10. Hasan M.H.C., Sam Y.M., Aripin M.K., Harun M.H., Mohamad S.H., Implementation of robust composite nonlinear feedback for active front steering based vehicle yaw stability, 2017. Jurnal Teknologi, 79 (5/2), pp. 39-43.
  11. Chong S.-H., Chan C.-Y., Sato K., Sakthivelu V., Loh S.-L., Smodified-pid control with feedforward improvement for 1-degree-of-freedom pneumatic muscle actuated system, 2017. Jurnal Teknologi, 79 (5/2), pp. 51-57.
  12. Bahar M.B., Too J.W., Miskon M.F., Sobran N.M., Shaari N.L.A., Analysis of spinal EMG signal when swinging an object, 2017, International Journal of Applied Engineering Research, 12 (12), pp. 3431-3438.
  13. Ghazaly M.M., Yew S.K., Abdullah Z., Mohd Ali M.A., Horng C.S., Amran A.C., Trajectory tracking of a mobile robot system, 2017. Journal of Mechanical Engineering, Special Issue (1), pp. 207-226.
  14. Aras M.S.M., Teow B.P., Teoh A.K., Lee P.K., Kassim A.M., Harun M.H., Zambri M.K.M., Khamis A., Evaluation and analysis of pid and fuzzy control for auv-yaw control, 2017. Journal of Theoretical and Applied Information Technology, 95 (17), pp. 4256-4264.
  15. Shah H.N.M., Rashid M.Z.A., Kamis Z., Aras M.S.M., Ali N.M., Wasbari F., Tengku Anuar T.M.M., Sign detection vision based mobile robot platform, 2017. Indonesian Journal of Electrical Engineering and Computer Science, 7 (2), pp. 524-532.
  16. Aziz E.S.A., Kamarudin M.N., Jali M.H., Ghazali R., Modeling and stability analysis of Linear Actuated Finger, 2017. International Journal of Control and Automation, 10 (1), pp. 49-62.
  17. Ghazaly M.M., Yeo C.K., Chong S.H., Yusri I., Tee S.P., Parameter optimization of a tubular linear type reluctance motor for high thrust force, 2017. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3), pp. 117-120.
  18. Khamis A., Ghani M.R.A., Gan C.K., Aras M.M., Khamis M.F., Sutikno T., Zanariah J., Fuzzy logic implementation with MATLAB for PV-wind hybrid system, 2017. Telkomnika (Telecommunication Computing Electronics and Control), 15 (3), pp. 1181-1191.
  19. Khamis A., Ab Ghani M.R., Kim G.C., Mohd Aras M.S., Bin AB Rashid M.Z., Dahlan N.A.B., Modeling and analysis microturbine and battery storage system microgrid system based on green energy, 2017. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2/7), pp. 89-94.
  20. Aras M.S.M., Sulaiman M., Keong Y.E., Afif Kasno M., Kassim A.M., Khamis A., Performance analysis of PID and fuzzy logic controller for unmanned underwater vehicle for depth control, 2017. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3/2), pp. 59-63.
  21. Hj Shukor A.Z., Kii N.J., Miskon M.F., AliIbrahim F., Jamaluddin M.H., Pre-contact sensor based collision avoidance manipulator, 2017. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3), pp. 175-179.
  22. Tarmizi A.I.B., Shukor A.Z.B.H., Sobran N.M.B.M., Jamaluddin M.H.B., Latest trend in person following robot control algorithm: A review, 2017. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3), pp. 169-174.
  23. Shah H.N.M., Sulaiman M., Shukor A.Z., Kamis Z., Ab Rashid M.Z., Vision based for classification of mig butt welding joint defect using occurrence matrices and gray absolute histogram, 2017. International Journal of Mechanical and Mechatronics Engineering, 17 (5), pp. 60-66.
  24. Aras M.S.M., Kamarudin M.N., Zainal I., Zambri M.K.M., Sulaiman M., Analysis of integrated sensor for unmanned underwater vehicle application, 2017. Indian Journal of Geo-Marine Sciences, 46 (12), pp. 2552-2561.
  25. Murad N.S.F.M., Kamarudin M.N., Rozali S.Md., Shaharudin N.M., Khamis A., Husain A.R., Variable speed control of two-mass wind turbine with unknown stiffness, 2017. Journal of Telecommunication, Electronic and Computer Engineering, 9 (4), pp. 117-121.
  26. Ramli L., Mohamed Z., Abdullahi A.M., Jaafar H.I., Lazim I.M., Control strategies for crane systems: A comprehensive review, 2017. Mechanical Systems and Signal Processing, 95, pp. 1-23.
  27. Mansor N.N., Jamaluddin M.H., Shukor A.Z., Concept and application of virtual reality haptic technology: A review, 2017. Journal of Theoretical and Applied Information Technology, 95 (14), pp. 3320-3336.

 

 

EPS 

  1. Sardi J., Mithulananthan N., Gallagher M., Hung D.Q., Multiple community energy storage planning in distribution networks using a cost-benefit analysis, 2017. Applied Energy, 190, pp. 453-463.
  2. Ab Ghani S., Muhamad N.A., Noorden Z.A., Zainuddin H., Talib M.A., Oxidation stability enhancement of natural ester insulation oil: Optimizing the antioxidants mixtures by two-level factorial design, 2017. ARPN Journal of Engineering and Applied Sciences, 12 (6), pp. 1694-1700.
  3. Bakar N.A., Abu-Siada A., A new method to detect dissolved gases in transformer oil using NIR-IR spectroscopy, 2017. IEEE Transactions on Dielectrics and Electrical Insulation, 24 (1), pp. 409-419.
  4. Aziz N.H., Catterson V.M., Rowland S.M., Bahadoorsingh S., Analysis of partial discharge features as prognostic indicators of electrical treeing, 2017. IEEE Transactions on Dielectrics and Electrical Insulation, 24 (1), pp. 129-136.
  5. Nor A.F.M., Sulaiman M., Kadir A.F.A., Omar R., Voltage stability analysis of load buses in electric power system using adaptive neuro-fuzzy inference system (anfis) and probabilistic neural network (pnn), 2017. ARPN Journal of Engineering and Applied Sciences, 12 (5), pp. 1406-1412.
  6. Mohammed H., Sulaiman M., Rasheed M., Omar R., Aras S., Fateh A., Stability studies of fuzzy logic based power system stabilizer in enhancing dynamic stability of a two generators tie-line system, 2017. ARPN Journal of Engineering and Applied Sciences, 12 (5), pp. 1662-1669.
  7. Ridzuan M.R.M., Hassan E.E., Abdullah A.R., A hybrid MEP and AIS algorithm for energy dispatch in power system, 2017. International Journal of Simulation: Systems, Science and Technology, 17 (41), pp. 19.1-19.5.
  8. Ghani S.A., Muhamad N.A., Zainuddin H., Noorden Z.A., Mohamad N., Application of response surface methodology for optimizing the oxidative stability of natural ester oil using mixed antioxidants, 2017. IEEE Transactions on Dielectrics and Electrical Insulation, 24 (2), pp. 974-983.
  9. Ab Ghani M.R., Farah N., Lazi J., Tamjis M.R., Othman M.N., Mohd Amin N.H., Othman S., Jano Z., Sutikno T., Investigation study of three-level cascaded H-bridge multilevel inverter, 2017. Telkomnika (Telecommunication Computing Electronics and Control), 15 (1), pp.125-137.
  10. Ab Ghani M.R., Hussein S.T., Mohd Amin N.H., Jano Z., Dynamic economic dispatch problems: PSO approach, 2017. Telkomnika (Telecommunication Computing Electronics and Control), 15 (1), pp. 48-61.
  11. Ibrahim K.A., Au M.T., Gan C.K., Tang J.H., System wide MV distribution network technical losses estimation based on reference feeder and energy flow model, 2017. International Journal of Electrical Power and Energy Systems, 93, pp. 440-450.
  12. Ali N.N., Aman A., Razak J.A., Zakaria Z., Zainuddin H., Optimization of surface resistivity and relative permittivity of silicone rubber for high voltage application using response surface methodology, 2017. Journal of Electrical Systems, 13 (2), pp. 211-227.
  13. Chairul I.S., Ghani S.A., Zainuddin H., Rahim N.H., Talib M.A., Nor Rahman N.H., Exploration of the potential of reclaimed waste cooking oil for oil-immersed power transformers, 2017. Telkomnika (Telecommunication Computing Electronics and Control), 15 (2), pp. 957-963.
  14. Salim N.B., Aboelsoud H., Tsuji T., Oyama T., Uchida K., Load frequency control of Two-area network using renewable energy resources and battery energy storage system, 2017. Journal of Electrical Systems, 13 (2), pp. 348-365.
  15. Annathurai V., Gan C.K., Ghani M.R.A., Baharin K.A., Impacts of solar variability on distribution networks performance, 2017. International Journal of Applied Engineering Research, 12 (7), pp. 1151-1155.
  16. Othman N.A., Zainuddin H., Aman A., Ghani S.A., Chairul I.S., The correlation between surface tracking and partial discharge characteristics on pressboard surface immersed in MIDEL en, 2017. International Journal of Electrical and Computer Engineering, 7 (2), pp. 631-640.
  17. Fatheli M.H.B., Zolkifri N.I., Gan C.K., Lada M.B.Y., Development of load control algorithm for PV microgrid, 2017. International Journal of Electrical and Computer Engineering, 7 (2), pp. 619-630.
  18. Ghani S.A., Noorden Z.A., Muhamad N.A., Zainuddin H., Abdullah M.I.H.C., Chairul I.S., Dielectric strength improvement of natural ester insulation oil via mixed antioxidants: Taguchi approach, 2017. International Journal of Electrical and Computer Engineering, 7 (2), pp. 650-658.
  19. Bin Salim N., Tsuji T., Oyama T., Uchida K., Optimal reactive power control of inverter-based distributed generator for voltage stability insight using Particle Swarm Optimization, 2017. IEEJ Transactions on Power and Energy, 137 (5), pp. 392-404.
  20. Khamis A., Xu Y., Mohamed A., Comparative study in determining features extraction for islanding detection using data mining technique: Correlation and coefficient analysis, 2017. International Journal of Electrical and Computer Engineering, 7 (3), pp. 1112-1124.
  21. Bohari Z.H., Azhari N.A., Rahman N.N.A., Baharom M.F., Jali M.H., Sulaima M.F., Izzuddin T.A., Experimental study of bioelectricity-microbial fuel cell for electricity generation: Performance characterization and capacity improvement, 2017. Jurnal Teknologi, 79 (5/2), pp. 1-5.
  22. Ghani S.A., Muhamad N.A., Noorden Z.A., Zainuddin H., Ahmad A.A., Multi-response optimization of the properties of natural ester oil with mixed antioxidants using taguchi-based methodology, 2017. IEEE Transactions on Dielectrics and Electrical Insulation, 24 (3), pp.1674-1684.
  23. Shamshiri M., Gan C.K., Omar R., Assessment of distribution networks performance considering residential photovoltaic systems with demand response applications, 2017. Journal of Renewable and Sustainable Energy, 9 (4), 45502.
  24. Sahib T.J., Ghani M.R.A., Jano Z., Mohamed I.H., Optimum allocation of distributed generation using PSO: IEEE test case studies evaluation, 2017. International Journal of Applied Engineering Research, 12 (11), pp. 2900-2906.
  25. Sardi J., Mithulananthan N., Hung D.Q., Strategic allocation of community energy storage in a residential system with rooftop PV units, 2017. Applied Energy, 206, pp.159-171.
  26. Norhan S.N., Zainuddin H., Ghani S.A., Chairul I.S., Optimization of the mixing process parameters to enhance the dielectric strength of mineral and palm fatty acid ester insulating oil blends, 2017. Journal of Electrical Systems, 13 (3), pp. 595-605.
  27. Zainoddin M.H.S., Zainuddin H., Aman A., Dielectrophoresis effect of dielectric liquids with suspended cellulose impurities under DC electric field, 2017. International Journal of Electrical and Computer Engineering, 7 (6), pp. 3254-3261.
  28. Ramani A.N., Ariffin A.M., Vijian G., Ghani A.B.A., The effects of nano fillers on space charge distribution in cross-linked polyethylene, 2017. International Journal of Electrical and Computer Engineering, 7 (6), pp. 3147-3152.
  29. Salleh Z., Sulaiman M., Patakor F.A., Omar R., Rules reduction and optimization of fuzzy logic membership functions for induction motor speed controller, 2017. Journal of Theoretical and Applied Information Technology, 95 (19), pp. 4922-4934.
  30. Nor A.F.M., Sulaiman M., Kadir A.F.A., Omar R., Classifications of voltage stability margin (VSM) and load power margin (LPM) using probabilistic neural network (PNN), 2017. ARPN Journal of Engineering and Applied Sciences, 12 (19), pp. 5591-5596.
  31. Ammar N., Sulaiman M., Nor A.F.M., Analysis load forecasting of power system using fuzzy logic and artificial neural network, 2017, Journal of Telecommunication, Electronic and Computer Engineering, 9 (3), pp. 181-192.
  32. Mohamad M.S., Zainuddin H., Ghani S.A., Chairul I.S., AC breakdown voltage and viscosity of palm fatty acid ester (PFAE) oil-based nanofluids, 2017. Journal of Electrical Engineering and Technology, 12 (6), pp. 2333-2341.
  33. Sulaima M.F., Jali M.H., Bohari Z.H., Baharom M.F., Baharin N., Evaluation of power distribution network system by using Self-Organizing Map (SOM) as the best practice for buses characteristic classification, 2017. Journal of Theoretical and Applied Information Technology, 95 (20), pp. 5415-5421.
  34. Hadi N.A.A., Rashid W.N.A., Hashim N.M.Z., Mohamad N.R., Kadmin A.F., Impact of voltage fluctuate, flicker and power factor wave electric generator to local distribution, 2017. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2/11), pp. 61-65.
  35. Ridzuan M.R.M., Hassan E.E., Abdullah A.R., Bahaman N., Kadir A.F.A., NMEP based Gaussian mutation process on optimizing fitness function for MOEED, 2017. International Journal on Advanced Science, Engineering and Information Technology, 7 (5), pp. 1840-1846.
  36. Jifri M.H., Hassan E.E., Miswan N.H., Bahaman N., Macro-factor affecting the electricity load demand in power system, 2017. International Journal on Advanced Science, Engineering and Information Technology, 7 (5), pp. 1818-1824.
  37. Hussein H.M., Sulaiman M., Omar R., Mohd Aras M.S., Effect of double fuzzy logic controller (DFLC) based on power system stabilizer (PSS) on a tie-line two generators system, 2017. ARPN Journal of Engineering and Applied Sciences, 12 (21), pp. 6130-6139.
  38. Hazim H.I., Omar R.B., Mohammed I.H., Abdalla A.N., Sulaiman M.B., Rasheed M., A novel firefly algorithm for distribution system state estimation, 2017. Journal of Engineering and Applied Sciences, 12 (20), pp. 5160-5165.
  39. Zainoddin M.H.S., Zainuddin H., Aman A., Investigation of the dielectrophoresis effect on the electrical performance of dielectric liquid, 2017. ARPN Journal of Engineering and Applied Sciences, 12 (23), pp. 7003-7007.
  40. Sulaima M.F., Dahlan N.Y., Yasin Z.M., Asari N.A.M., Bohari Z.H., Optimum enhance time of use (ETOU) for demand side electricity pricing in regulated market: An implementation using evolutionary algorithm, 2017. Indonesian Journal of Electrical Engineering and Computer Science, 8 (1), pp. 253-261.
  41. Bakar N.N.A., Hassan M.Y., Sulaima M.F., Mohd Nasir M.N., Khamis A., Microgrid and load shedding scheme during islanded mode: A review,2017. Renewable and Sustainable Energy Reviews, 71, pp. 161-169.
  42. Fuad M.A.M., Ghani M.R.A., Ghazali R., Sulaima M.F., Jali M.H., Sutikno T., Izzuddin T.A., Jano Z., A review on methods of identifying and counting Aedes aegypti larvae using image segmentation technique, 2017. Telkomnika (Telecommunication Computing Electronics and Control), 15 (3), pp. 1199-1206.

 

 

PED

  1. Hasim A.S.A., Ibrahim Z., Talib M.H.N., Dardin S.M.F.S.M., Three-phase reference current generator employing with Kalman filter for shunt active power filter, 2017. Journal of Electrical Engineering and Technology, 12 (1), pp. 151-160.
  2. Suhairi R., Firdaus R.N., Aishah M.Z., Azhar F., Othman M.N., Ibrahim Z., Aravind C.V., Performance characteristics of non-arc double stator permanent magnet generator, 2017. Progress In Electromagnetics Research M, 53, pp. 201-214.
  3. Suhairi R., Firdaus R.N., Azhar F., Karim K.A., Jidin A., Khamis A., Ibrahim Z., Sutikno T., Analysis of three and five-phase double stator slotted rotor permanent magnet generator (DSSR-PMG), 2017. International Journal of Power Electronics and Drive Systems, 8 (1), pp. 201-214.
  4. Firdaus R.N., Farina S., Suhairi R., Karim K.A., Azhar F., Khamis A., Norhisam M., Improvement of torque density spoke type BLDC motor using new hollow rotor topology, 2017. International Review of Electrical Engineering, 12 (1), pp. 19-25.
  5. Karim K.A., Abdullah N., Othman M.N., Jidin A., Firdaus R.N., Modeling of 6 to 4 switched reluctance motor using coefficient method and analytical method, 2017. Indonesian Journal of Electrical Engineering and Computer Science, 7 (2), pp. 373-380.
  6. Omar M.F., Sulaiman E., Jenal M., Kumar R., Firdaus R.N., Magnetic Flux Analysis of a New Field-Excitation Flux Switching Motor Using Segmental Rotor, 2017. IEEE Transactions on Magnetics, 53 (11), 7926414.
  7.  Talib M.H.N., Ibrahim Z., Rasin Z., Mat Lazi J., Azri M., Investigation of different rules size FLSC performance applied to induction motor drive, 2017. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2/8), pp. 165-169.
  8. Ahmad S.R.C., Othman R.N.F.K.R., Othman M.N., Zuki N.A.M., Shukor F.A.A., Isa S.Z.M., Ibrahim Z., Vaithilingam C.A., Modeling and analysis of double stator slotted rotor permanent magnet generator, 2017. Energies, 10 (3), 411.
  9. Yaakub M.F., Basar M.F., Yahaya M.S., Mohd Noh F.H., Kamarudin H.Z., A micro-power generation from rain shower utilizing PZT and PVDT piezoelectric transducer, 2017. ARPN Journal of Engineering and Applied Sciences, 12 (22), pp. 6285-6290.
  10. Jidin A., Karim K.A., Rahim K., Raj L.R.L.V., Ramahlingam S., Sutikno T., A review on constant switching frequency techniques for direct torque control of induction motor, 2017. Indonesian Journal of Electrical Engineering and Computer Science, 7(2), pp. 364-372.

 

 

REAT 

  1. Habban M.F.B., Manap M., Abdullah A.R., Jopri M.H., Sutikno T., An evaluation of linear time frequency distribution analysis for VSI switch faults identification, 2017. International Journal of Power Electronics and Drive Systems, 8 (1), pp. 1-9.
  2. Ab Halim M.F.M., Azlan U.A.-A., Harun M.H., Annuar K.A.M., Mustafa M., Johari S.H., Abdullah A.R., Hushim M.F., Lighting retrofit scheme economic evaluation, 2017. Indonesian Journal of Electrical Engineering and Computer Science, 5 (3), pp. 496-501.
  3. Ali N.M., Karis M.S., Sobran N.M.M., Bahar M.B., Ken O.K., Ibrahim M.M., Johan N.F., Detection of multiple mangoes using histogram of oriented gradient technique in aerial monitoring, 2017. ARPN Journal of Engineering and Applied Sciences, 12 (8), pp. 2730-2736.
  4. Alie N.M., Karis M.S., Wong G.-J., Bahar M.B., Sulaiman M., Ibrahim M.M., Abidin A.F.Z., Quality checking and inspection based on machine vision technique to determine tolerancevalue using single ceramic cup, 2017. ARPN Journal of Engineering and Applied Sciences, 12 (8), pp. 2737-2742.
  5. Abdullah A.R., Syafeeza A.R., Mood M.A.U.C., Zawawi T.N.S.T., Munzier A.R., An improved features of health screening test system for Malaysian social security organisation (SOCSO) programme, 2017. Indonesian Journal of Electrical Engineering and Computer Science, 6 (2), pp. 473-481.
  6. Saad N.M., Noor N.S.M., Abdullah A.R., Fong O.Y., Rahman N.N.S.A., Real-time LCD digit recognition system, 2017. Indonesian Journal of Electrical Engineering and Computer Science, 6 (2), pp. 402-411.
  7. Ali N.M., Karis M.S., Bahar M.B., Ken O.K., Ibrahim M.M., Sulaiman M., Abidin A.F.Z., Prototype of mango inspection and labeling using image processing technique, 2017. ARPN Journal of Engineering and Applied Sciences, 12 (10), pp. 3174-3178.
  8. Jopri M.H., Abdullah A.R., Manap M., Yusoff M.R., Sutikno T., Habban M.F., An improved detection and classification technique of harmonic signals in power distribution by utilizing spectrogram, 2017. International Journal of Electrical and Computer Engineering, 7 (1), pp. 12-20.
  9. Jopri M.H., Abdullah A.R., Sutikno T., Manap M., Yusoff M.R., A utilisation of improved gabor transform for harmonic signals detection and classification analysis, 2017. International Journal of Electrical and Computer Engineering, 7 (1), pp. 21-28.
  10. Jopri M.H., Abdullah A.R., Manap M., Yusoff M.R., Sutikno T., A fast localization of multiple harmonic sources for rectifier loads by utilizing periodogram, 2017. Telkomnika (Telecommunication Computing Electronics and Control), 15 (1), pp. 71-78.
  11. Jopri M.H., Abdullah A.R., Manap M., Habban M.F., Sutikno T., An accurate classification method of harmonic signals in power distribution system by utilising S-transform, 2017. Telkomnika (Telecommunication Computing Electronics and Control), 15 (1), pp. 62-70.
  12. Ali N.M., Karis M.S., Tarusan S.A.A., Wong G.-J., Aras M.S.M., Bahar M.B., Abidin A.F.Z., Inspection and quality checking of ceramic cup using machine vision technique: Design and analysis, 2017. Jurnal Teknologi, 79 (5/2), pp. 33-38.
  13. Mohammed M.Q., Miskon M.F., Jalil M.A., Smooth sub-phases based trajectory planning for exoskeleton system, 2017. International Review of Electrical Engineering, 12 (3), pp. 267-276.
  14. Saad N.M., Noor N.S.M., Abdullah A.R., Muda S., Muda A.F., Musa H., Segmentation and classification analysis techniques for stroke based on diffusion weighted images, 2017. IAENG International Journal of Computer Science, 44 (3), pp. 388-395.
  15. Jali M.H., Izzuddin T.A., Ghazali R., Soon C.C., Zohedi F.N., Robust controller design with particle swarm optimization for nonlinear prosthetic hand system, 2017. International Journal of Mechanical Engineering and Robotics Research, 6 (5), pp. 406-412.
  16. Wansin Y., Latif M.J.A., Saad N.M., Alhabshi S.M.I., Kadir M.R.A., Characterization of articular cartilage using low-field magnetic resonance imaging image, 2017. Journal of Medical Imaging and Health Informatics, 7 (6), pp. 1149-1152.
  17. Mohammed M.Q., Miskon M.F., Bin Bahar M.B., Ali S.A., Comparative study between quintic and cubic polynomial equations based walking trajectory of exoskeleton system, 2017. International Journal of Mechanical and Mechatronics Engineering, 17 (4), pp. 43-51.
  18. Burhan N., Kasno M.A., Ghazali R., Said M.R., Abdullah S.S., Jali M.H., Analysis of the Biceps Brachii Muscle by Varying the Arm Movement Level and Load Resistance Band, 2017. Journal of Healthcare Engineering, 2017, 1631384.
  19. Shair E.F., Ahmad S.A., Abdullah A.R., Marhaban M.H., Mohd Tamrin S.B., Impact of different lifting height and load mass on muscle performance using periodogram, 2017. Pertanika Journal of Science and Technology, 25 (S), pp. 1-8.
  20. Zahari S.N., Latif M.J.A., Rahim N.R.A., Kadir M.R.A., Kamarul T., The Effects of Physiological Biomechanical Loading on Intradiscal Pressure and Annulus Stress in Lumbar Spine: A Finite Element Analysis, 2017. Journal of Healthcare Engineering, 2017, 9618940.
  21. Basir M.S.S.M., Abdullah A.R., Selamat N.A., Musa H., Ranom R., Lead acid battery analysis using S-transform, 2017. International Journal on Advanced Science, Engineering and Information Technology, 7 (5), pp. 1832-1839.
  22. Afif Kasno M., Aras M.S.M., Keong Y.E., Azis F.A., Kassim A.M., Harun M.H., Zambri M.K.M., Khamis A., Design analysis of Remotely Amphibian Vehicle (RAV) –Underwater drone, 2017. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3/2), pp. 35-38.
  23. Jalil M.B.A., Miskon M.F.B., Bahar M.B.B., Jamaluddin M.H.B., Ali F.B., Yunus Y.B., Force adaptation algorithm for finger exercise using Kuka Youbot, 2017. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3/2), pp. 27-30.
  24.  Ghazali R., Saad M.Z., Hussien S.Y.S., Jali M.H., Zohedi F.N., Izzuddin T.A., Intelligent controller design for multifunctional prosthetics hand, 2017. International Journal of Mechanical Engineering and Robotics Research, 6 (6), pp. 495-501.
  25. Ali S.A., Miskon M.F., Hj Shukor A.Z., Mohammed M.Q., Single link bilateral haptics control with PD controller and geared DC-motor in robotic rehabilitation technology, 2017. International Journal of Mechanical and Mechatronics Engineering, 17 (5), pp. 148-155.
  26. Jopri M.H., Abdullah A.R., Manap M., Ghani M.R.A.b., Saleh N.H., Harmonic contribution analysis of electric arc furnace by using spectrogram, 2017. International Journal of Mechanical and Mechatronics Engineering, 17 (5), pp. 28-36.
  27. Saad N.M., Abdul Rahman N.N.S., Abdullah A.R., Abd Latif M.J., Shape defect detection using Local Standard Deviation and rule-based classifier for bottle quality inspection, 2017. Indonesian Journal of Electrical Engineering and Computer Science, 8 (1), pp. 107-114.
  28. Hussien S.Y.S., Ghazali R., Jaafar H.I., Soon C.C., Disturbance rejection experimental in 3d inteco gantry crane system via pid-vsc tuned by pfpso, 2017. Journal of Engineering Science and Technology, 12 (Special Issue), pp. 26-38.
  29. Jali M.H., Hamdani M.F., Zohedi F.N., Ghazali R., System identification and fuzzy logic controller design for prosthetic hand system, 2017. Journal of Engineering Science and Technology, 12 (Special Issue), pp. 52-63.
  30. Ghazali R., Paharudin M., Sam Y.M., Hussien S.Y.S., Jali M.H., Intelligent controller design for a nonlinear quarter-car active suspension with electro-hydraulic actuator, 2017. Journal of Engineering Science and Technology, 12 (Special Issue), pp. 39-51.
  31. Shair E.F., Ahmad S.A., Marhaban M.H., Mohd Tamrin S.B., Abdullah A.R., EMG Processing Based Measures of Fatigue Assessment during Manual Lifting, 2017. BioMed research international, 2017, 3937254.
  32. Ali S.A., Miskon M.F., Shukor A.Z.H., Bahar M.B., Mohammed M.Q., Review on application of haptic in robotic rehabilitation technology, 2017. International Journal of Applied Engineering Research, 12 (12), pp. 3203-3213.

 

2016

 

  1. Jaafar Y.L., Latif M.J.A., Hashim N.H., Kadir M.R.A., 2016. The effects of thickness on biomechanical behavior of articular cartilage: A finite element analysis. ARPN Journal of Engineering and Applied Sciences, 11(8), pp. 5331-5335.
  2. Razak I.A.W.A., Abidin I.Z., Yap K.S., Abidin A.A.Z., Rahman T.K.A., Ahmad A., 2016. A novel method of BFOA-LSSVM for electricity price forecasting. ARPN Journal of Engineering and Applied Sciences, 11(8), pp. 4961-4698.
  3. Ab Ghani S., Muhamad N.A., Chairul I.S., Jamri N., A study of moisture effects on the breakdown voltage and spectral characteristics of mineral and palm oil-based insulation oils. ARPN Journal of Engineering and Applied Sciences, 11(8), pp. 5012-5020.
  4. Salam Z., Ramli M.Z., Ahmed J., 2016. Comparative study of software and hardware solutions for partial shading in PV system. 2015 IEEE Conference on Energy Conversion, pp. 480-485.
  5. Ramli N.R., Razali S., Osman M., 2016. An overview of simulation software for non-experts to perform multi-robot experiments. 2015 International Symposium on Agents, Multi-Agent Systems and Robotics, ISAMSR 2015, pp. 77-82.
  6. Tarusan S.A., Tarmizi Y., Jidin A., Karim K.A., Ismail H., Sundram R., Rahim M.K., 2016. Constant switching frequency for Direct Torque Control of induction motor.  2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 228-233.
  7. Tarmizi Y., Jidin A., Karim K., Tarusan S.A., Rahim M.K., Sundram R., Ismail H., 2016. Investigation of torque and flux-current producing components in indirect rotor flux oriented control (IRFOC) of induction machines. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 539-544.
  8. Rahim M.K., Jidin A., Patkar F., Sundram R., Tarmizi Y., Ismail H., Tarusan S.A., 2016. Minimization of torque ripple and switching frequency utilizing optimal DTC switching strategy for dual-inverter supplied drive. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 49-54.
  9. Ismail H., Patkar F., Jidin A., Sundram R., Rahim M.K., Tarmizi Y., Razi A., 2016. Direct Torque Control of induction machine using 3-level neutral point clamped inverter. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 571-576.
  10. Sundram R., Jidin A.B., Razi A.B., Rahim M.K., Ismail H., Tarmizi Y., Raj L.L., 2016. Improve torque control performance of 3-phase DTC constant switching method using optimal PI parameter tuning strategy. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 577-582.
  11. Ramli N.R., Razali S., Osman M., 2016. A conceptual model for multi-robot cooperation inspired by immune network theory and somatic hypermutation. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 495-499.
  12. Chong S.-H., Sato K., 2016. Nominal characteristics trajectory following control as practical controller: A review. 2015 IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, pp. 4790-4795.
  13. Ghazaly M.M., Huan T.T., Al Regeev V., Al Vijayan K., Horng C.S., Amran A.C., Abdullah Z., Md Ali M.A., 2016. Point-to-point (PTP) control performances of an upper limb robotic arm. Jurnal Teknologi, 78(7), pp. 131-140.
  14. Soon C.C., Ghazali R., Jaafar H.I., Hussien S.Y.S., Sam Y.M., Rahmat M.F., 2016. Controller parameter optimization for an electro-hydraulic actuator system based on particle swarm optimization technique. Jurnal Teknologi, 78(Jun), pp. 101-108.
  15. Firdaus Raja Othman R.N., Farina S., Rizuan S., Karim K.A., Jidin A., Sutikno T., Misron N., 2016. Design of hollow-rotor brushless DC motor. International Journal of Power Electronics and Drive Systems, 7(2), pp. 387-396.
  16. Ali S.A., Annuar K.A.M., Miskon M.F., 2016. Trajectory planning for exoskeleton robot by using cubic and quintic polynomial equation.  International Journal of Applied Engineering Research, 11(13), pp. 7943-7946.
  17. Sakthivelu V., Chong S.-H., Tan M.H., Ghazaly M.M., 2016. Phenomenological modeling and classic control of a pneumatic muscle actuator system.  International Journal of Control and Automation, 9(4), pp. 301-312.
  18. Ramli N.R., Razali S., Osman M., 2016. Learning in immune network algorithm for multi-robot cooperation. Journal of Telecommunication, Electronic and Computer Engineering, 8(2), pp. 111-116.
  19. Yusri I., Md Ghazaly M., Ali Alandoli E.A., Rahmat M.F., Abdullah Z., Md Ali M.A., Ranom R., 2016. Optimization of the force characteristic of rotary motion type of electromagnetic actuator based on finite element analysis. Penerbit UTM Press, 78(2), pp. 13-20.
  20. bin Mohd M.F., Halim A., Harun M.H., Annuar K.A.M., bin Azahar A.H., bin Ab Hadi N.A., 2016. Photovoltaic economic potential for investment portfolio in South East Asia.  ARPN Journal of Engineering and Applied Sciences, 11(9), pp. 11260-11265.
  21. Ghazaly M.M., Ahmed Yahya T., Che Amran A., Abdullah Z., Md Ali M.A., Jamaludin A.H., Mohd Ali N., 2016. Force characterization of a tubular linear electromagnetic actuator using finite element analysis method (FEM).  Jurnal Teknologi, 78(11), pp. 217-225.
  22. Hussien S.Y.S., Ghazali R., Jaafar H.I., Soon C.C., 2016. Analysis of 3D gantry crane system by PID and VSC for positioning trolley and oscillation reduction. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 139-143.
  23. Jamaluddin M.H., Shukor A.Z., Miskon M.F., AliIbrahim F., Redzuan M.Q.A., 2016. An analysis of sensor placement for vehicle's blind spot detection and warning system.  Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 101-106.
  24. Mohammed M.Q., Miskon M.F., Bin Bahar M.B., Bin Ali F., 2016. Walking motion trajectory of hip powered orthotic device using quintic polynomial equation.  Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 151-155.
  25. Hussien S.Y.S., Ghazali R., Jaafar H.I., Soon C.C., 2016. An experimental of 3D gantry crane system in motion control by PID and PD controller via PFPSO optimization.  Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 133-137.
  26. Zainal I., Aras M.S.M., Kamarudin M.N., Harun M.H., Zambri M.K.M., Khamis A., Kassim A.M., 2016. Design process and hydrodynamic analysis of underwater remotely operated crawler. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 35-39.
  27. Bin Hj Shukor A.Z., Gopalasamy, Bin Miskon M.F., Bin AliIbrahim F., 2016. Earthquake disaster awareness system. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 145-149.
  28. Jali M.H., Rashid N.A., Ghazali R., Izzuddin T.A., Aziz E.S.A., 2016. Parameter estimation technique of nonlinear prosthetic hand system.  International Journal of Engineering and Technology,  8(5), pp. 2161-2168.
  29. Norizan M.A., Teng F.M.A., Ali F., Abas N., Jamaluddin H., Borhan M.A., Johari M.F., 2016 RH-2000 robotic hand control based on linear enveloped electromyography signal from forearm muscle. ARPN Journal of Engineering and Applied Sciences, 11(5), pp. 3336-3340.
  30. Sani Z.M., Ghani H.A., Besar R., Loi W.S., 2016. Daytime road marker recognition using grayscale histogram and pixel values. Internetworking Indonesia Journal, 8(1), pp.11-16.
  31. Zawawi T.N.S.T., Abdullah A.R., Halim I., Shair E.F., Salleh S.M., 2016. Application of spectrogram in analysing electromyography (EMG) signals of manual lifting. ARPN Journal of Engineering and Applied Sciences, 11(6), pp. 3603-3609.
  32. Abdulzahra A.A., Bin Tamjis M.R., Ab Ghani M.R., Akmal S., Pheng L.G., Saif T.H., Ghassan J.K., Ahmed D.S., Zulkefle A.A., 2016. Comparison study of energy efficiency activities programs among the selected region and countries: Lessons learned for Malaysia. ARPN Journal of Engineering and Applied Sciences, 11(6), pp.3980-3984.
  33. Razali M.Z.B., Abdullah A.R.B., Mohamed W.A.N.W., Khiar M.S.A., 2016. Hydrogen inlet pressures parameter analysis of Proton Exchange Membrane Fuel cell (PEMFC) using spectrogram. ARPN Journal of Engineering and Applied Sciences, 11(6), pp. 3875-3882.
  34. Roong A.S.C., Chong S.-H., 2016.      Laboratory-scale single axis solar tracking system: Design and implementation       International. Journal of Power Electronics and Drive Systems, 7(1), pp. 254-264.
  35. Kasim R., Abdullah A.R., Selamat N.A., Basir M.S.S.M., Ramli M.Z., 2016. Nickel-Cadmium battery analysis using spectrogram. ARPN Journal of Engineering and Applied Sciences, 11(6), pp. 3975-3979
  36. Pheng L.G., Affandi R., Ab Ghani M.R., Kim G.C., Zano Z.,     2016. Study the feasibility of Parabolic Dish (PD) from several prospective criteria in Malaysia environment. ARPN Journal of Engineering and Applied Sciences, 11(6), pp.  3929-3937.
  37. Bohari Z.H., Nasir M.N.M., Baharom M.F., Jali M.H., Sulaima M.F., Baharin N., 2016. Technical review of the ASEAN grid power interconnection projects. Journal of Theoretical and Applied Information Technology, 86(1), pp. 173-183.
  38. Sulaima M.F., Jali M.H., Bohari Z.H., Baharom M.F., Baharin N., 2016. Evaluation of power distribution network system by using self-Organizing Map (SOM) as the best practice for buses characteristic classification. Journal of Theoretical and Applied Information Technology, 86(2), pp. 299-305.
  39. Anggoro B., Burhan J., Mohamad R.T., Zulkefle A.A., 2016. The bandung soil characteristics as a function of injection current frequency for electrical grounding systems. International Journal of Applied Engineering Research, 11(2), pp. 1361-1368.
  40. Kassim N.M., Abdullah A.R., Kadir A.F.A., Shamsudin N.H., 2016. Analysis of harmonic source identifier using periodogram. ARPN Journal of Engineering and Applied Sciences, 11(8), pp. 5071-5077.
  41. Annathurai V., Gan C.K., Baharin K.A., Ab Ghani M.R., 2016. Shading analysis for the siting of solar PV power plant. ARPN Journal of Engineering and Applied Sciences, 11(8), pp. 5021-5027.
  42. Razak I.A.W.A., Abidin I.Z., Yap K.S., Abidin A.A.Z., Rahman T.K.A., Ahmad A., 2016. A novel method of BFOA-LSSVM for electricity price forecasting. ARPN Journal of Engineering and Applied Sciences, 11(8), pp. 4961-4968.
  43. Ab Ghani S., Muhamad N.A., Chairul I.S., Jamri N., 2016. A study of moisture effects on the breakdown voltage and spectral characteristics of mineral and palm oil-based insulation oils. ARPN Journal of Engineering and Applied Sciences, 11(8), pp. 5012-5020.
  44. Sutikno T., Idris N.R.N., Jidin A., 2016. High-speed computation using FPGA for excellent performance of direct torque control of induction machines. Telkomnika (Telecommunication Computing Electronics and Control), 14(1), pp. 1-3.
  45. Zainuddin A., Radzi S.A., Ibrahim M., Hamid N.A., 2016.        A development of electrical vehicle charging system using wireless power transfer. ARPN Journal of Engineering and Applied Sciences, 11(10), pp. 6328-6333.
  46. Rasheed M., Omar R., Sabari A., Sulaiman M., 2016. Validation of a three-phase cascaded multilevel inverter based on Newton Raphson (N.R.). Indian Journal of Science and Technology, 9(20).
  47. Nizam M.S.H., Marizan S., Zaki S.A., Mohd Zamzuri A.R., 2016. Vision based identification and classification of weld defects in welding environments: A review                Indian Journal of Science and Technology, 9(20).
  48. Daud S., Kadir A.F.A., Lada M.Y., Gan C.K., 2016. A review: Optimal distributed generation planning and power quality issues. International Review of Electrical Engineering, 11(2), pp. 208-222.
  49. Ghazaly M.M., Huan T.T., Al Regeev V., Al Vijayan K., Horng C.S., Amran A.C., Abdullah Z., Md Ali M.A., 2016. Point-to-point (PTP) control performances of an upper limb robotic arm. Jurnal Teknologi, 78(7), pp. 131-140.
  50. Soon C.C., Ghazali R., Jaafar H.I., Hussien S.Y.S., Sam Y.M., Rahmat M.F., 2016. Controller parameter optimization for an electro-hydraulic actuator system based on particle swarm optimization technique. Jurnal Teknologi, 78(June), pp. 101-108.
  51. Rahim M.K., Jidin A., Sutikno T., 2016. Enhanced torque control and reduced switching frequency in direct torque control utilizing optimal switching strategy for dual-inverter supplied drive. International Journal of Power Electronics and Drive Systems, 7(2), pp. 328-339.
  52. Sundram R., Jidin A., Sutikno T., 2016. A novel optimal pi parameter tuning strategy to improve constant switching performance of direct torque control            International. Journal of Power Electronics and Drive Systems, 7(2), pp. 422-430.
  53. Azri M., Mubin A.N.A., Ibrahim Z., Rahim N.A., Raihan S.R.S., 2016. Mathematical modelling for proton exchange membrane fuel cell (PEMFC). Journal of Theoretical and Applied Information Technology, 86(3), pp. 409-419.
  54. Mohd Yusoff N.A., Karim K.A., Ghani S.A., Patkar F., Ahmad Tarusan S.A., Jidin A.,   2016. Analysis of multiphase transformer supplying a static and dynamic load. ARPN Journal of Engineering and Applied Sciences, 11(14), pp. 8987-8991.
  55. Razali A.M., Kamisman N., Lazi J.M., Bahari N., 2016. HEPWM using Differential evolution technique of hepwm for threephase voltage source inverter. ARPN Journal of Engineering and Applied Sciences, 11(14), pp. 8958-8964.
  56. Azhar F., Firdaus R.N., Mohd Jamil M.L., 2016. Design of a linear dc motor for high thrust constants characteristics. ARPN Journal of Engineering and Applied Sciences, 11(14), pp. 8764-8769.
  57. Baharudin Z.A., Rahman A.I.A., Zainol M., Tamjis M.R., Hanafiah M.A.M., Ghani M.R.A., Abdullah L., Aman O., Adnan H., Zulkefle A.A., Shah I.A., Rahman P.N.S.A.B., Muhammad M.R., 2016. Cloud-to-ground lightning flashes under the influence of pollution in Malaysia and some countries. ARPN Journal of Engineering and Applied Sciences, 11(14), pp. 8893-8896.
  58. Tamjis M.R., Baharudin Z.A., Hanafiah M.A.M., Rahman A.I.A., Zainon M., Zulkefle A.A., Ibrahim M., Salim S.N.S., Ibrahim I.M., Ghani M.R.A., Rahman R.R.R.A., Shah I.A., Rahman P.N.S.A.B., Shahril S.N.M., Ahmeed D.S., Syafiq A., Wan Adnan W.A., 2016. Permeance based algorithm for computation of flux linkage characteristics of non-linear 6/4 switched reluctance motor (SRM). ARPN Journal of Engineering and Applied Sciences, 11(14), pp. 8897-8901.
  59. Foo J.E., Chong S.H., Hee W.K., Loh S.L., Hashim N., 2016. Fast positioning performance in ball screw mechanism with disturbance observer. Jurnal Teknologi, 78(8), pp. 71-78.
  60. Razali A.M., Kamisman N., Lazi J.M., Bahari N.           2016       Differential evolution technique of hepwm for threephase voltage source inverter. ARPN Journal of Engineering and Applied Sciences, 11(14), pp.        8958-8964.
  61. Muda A.F., Mohd Saad N., Yin Fen L., Abdullah A.R., Waeleh N., 2016. Automated brain lesion classification using hybrid fuzzy c-means with correlation template and wavelet transform. Jurnal Teknologi, 78(May), pp. 39-48.
  62. Firdaus Raja Othman R.N., Farina S., Rizuan S., Karim K.A., Jidin A., Sutikno T., Misron N., 2016. Design of hollow-rotor brushless DC motor. International Journal of Power Electronics and Drive Systems, 7(2), pp. 387-396.
  63. Othman S.B., Bin Ab Ghani M.R., Rom Bin Tamjis M., 2016. Improvement of energy collection in a solar system. International Journal of Applied Engineering Research, 11(14), pp. 8136-8139.
  64. Ali S.A., Annuar K.A.M., Miskon M.F., 2016. Trajectory planning for exoskeleton robot by using cubic and quintic polynomial equation. International Journal of Applied Engineering Research, 11(13), pp. 7943-7946.
  65. Sakthivelu V., Chong S.-H., Tan M.H., Ghazaly M.M., 2016. Phenomenological modeling and classic control of a pneumatic muscle actuator system. International Journal of Control and Automation, 9(4), pp. 301-312.
  66. Basir M.S.S.M., Abdullah A.R., Ranom R., Kasim R., Selamat N.A., Shamsudin N.H., 2016. Experimental verification of nickel-metal hydride battery parameters estimation. Journal of Telecommunication, Electronic and Computer Engineering, 8(2), pp. 47-52.
  67. Kassim N.M., Abdullah A.R., Kadir A.F.A., Shamsudin N.H., 2016. Harmonics source identification analysis using spectrogram for rectifier load. Journal of Telecommunication, Electronic and Computer Engineering, 8(2), pp.  41-46.
  68. Salleh Z., Sulaiman M., Omar R., 2016. Tuning fuzzy membership functions to improve performance of vector control induction motor drives. Journal of Telecommunication, Electronic and Computer Engineering, 8(2), pp. 1-4.
  69. Ridzuan M.R.M., Hassan E.E., Abdullah A.R., Bahaman N., Kadir A.F.A., 2016. A new Meta Heuristic Evolutionary Programming (NMEP) in optimizing economic energy dispatch. Journal of Telecommunication, Electronic and Computer Engineering, 8(2), pp. 35-40.
  70. Jopri M.H., Abdullah A.R., Kassim N.M., Manap M., Ngatiman N.A., Yusoff M.R., 2016. Localization of multiple harmonic sources for inverter loads utilizing periodogram. Journal of Telecommunication, Electronic and Computer Engineering, 8(2), pp. 87-91.
  71. Alandoli E.A., Sulaiman M., Rashid M.Z.A., Shah H.N.M., Ismail Z., 2016. A review study on flexible link manipulators. Journal of Telecommunication, Electronic and Computer Engineering, 8(2), pp. 93-97.
  72. Tang T.F., Chong S.H., Tan M.H., Chan C.Y., Sato K., 2016. Characterization of pneumatic artificial muscle system in an opposing pair configuration. Journal of Telecommunication, Electronic and Computer Engineering, 8(2), pp. 73-77.
  73. Loh S.L., Gan C.K., Cheong T.H., Salleh S., Sarmin N.H., 2016. An overview on network diagrams: Graph-based representation. Journal of Telecommunication, Electronic and Computer Engineering, 8(2), pp. 83-86.
  74. Baharin K.A., Abdul Rahman H., Hassan M.Y., Gan C.K., 2016. Short-term forecasting of solar photovoltaic output power for tropical climate using ground-based measurement data. Journal of Renewable and Sustainable Energy, 8(5).
  75. Mohamad M.S., Zainuddin H., Ghani S.A., Chairul I.S., 2016. Comparative study on the AC breakdown voltage of palm fatty acid ester insulation oils mixed with iron oxide nanoparticles. Institute of Advanced Engineering and Science, 6(4), pp. 1481-1488.
  76. Ab Rashid M.Z., Mohd Shah H.N., Mohd Aras M.S., Kassim A.M., Ghazali R., Khamis A., Sulaiman M., Ali Alandoli E.A., Nordin S.K.S., 2016. Study and analysis of the gait and legs angle for hexapod on the certain trajectory using Fuzzy Logic Approach. International Journals of Engineering and Sciences Publisher, 16(4), pp. 48-56.
  77. Yusri I., Md Ghazaly M., Ali Alandoli E.A., Rahmat M.F., Abdullah Z., Md Ali M.A., Ranom R., 2016. Optimization of the force characteristic of rotary motion type of electromagnetic actuator based on finite element analysis. Penerbit UTM Press, 78(9), pp. 13-20.
  78. Annathurai V., Gan C.K., Ibrahim K.A., Baharin K.A., Ghani M.R., 2016. A review on the impact of distributed energy resources uncertainty on distribution networks. International Review of Electrical Engineering, 11(4), pp. 420-427.
  79. Aras M.S.M., Abdullah S.S., Othman S.Y.B., Sulaiman M., Basar M.F., Zambri M.K.M., Kamarudin M.N., 2016. Fuzzy logic controller for depth control of underwater remotely operated vehicle. Journal of Theoretical and Applied Information Technology, 91(2), pp. 275-288.
  80. Othman N.A., Zainuddin H., Aman A., Ghani S.A., Khiar M.S.A., Chairul I.S., Talib M.A., 2016. Investigation on the degradation behavior of creepage discharge on pressboard immersed in palm fatty acid ester (PFAE) oil. Jurnal Teknologi, 78(March), p. 36.
  81. Hasim N., Chong S.-H., Khor H.-K., 2016. Disturbance observer-based motion control for a simple direct drive system. Journal of Telecommunication, Electronic and Computer Engineering, 8(5), pp. 41-47.
  82. Karis M.S., Saad W.H.M., Ali N.M., We K.C., Razif N.R.A., Selamat A., Abidin A.F.Z., Kasyfu M., Ahmad A., 2016. Fruit sorting based on machine vision technique. Journal of Telecommunication, Electronic and Computer Engineering, 8(4), pp. 31-35.
  83. Ali N.M., Razif N.R.A., Karis M.S., Ken O.K., Saad W.H.M., Abidin A.F.Z., 2016. Inspection of mango with machine vision technique. Journal of Telecommunication, Electronic and Computer Engineering, 8(4), pp. 25-29.
  84. Ghazaly M.M., Ahmed Yahya T., Che Amran A., Abdullah Z., Md Ali M.A., Jamaludin A.H., Mohd Ali N., 2016. Force characterization of a tubular linear electromagnetic actuator using finite element analysis method (FEM). Jurnal Teknologi, 78(11), pp. 217-225.
  85. Ab Ghani M.R., Hussein S.T., Jano Z., Sutikno T., 2016. Particle Swarm Optimization performance: Comparison of dynamic economic dispatch with Dantzig-Wolfe decomposition. Telkomnika (Telecommunication Computing Electronics and Control), 14                3, pp. 1042-1051.
  86. Ab Ghani M.R., Pheng L.G., Gan C.K., Sutikno T., 2016. Sensitivity analysis and comparison between 25 kW Parabolic Dish system. Telkomnika (Telecommunication Computing Electronics and Control), 14(3), pp. 807-814.
  87. Pheng L.G., Ab Ghani M.R., Gan C.K., Sutikno T., 2016. Temperature control of the 25kW parabolic dish-stirling engine system. Telkomnika (Telecommunication Computing Electronics and Control), 14(3), pp. 800-806.
  88. Mohamed Kassim A., Yasuno T., Suzuki H., Shahrieel Mohd Aras M., Izzuan Jaafar H., Azni Jafar F., Subramonian S., 2016. Conceptual design and implementation of electronic spectacle based obstacle detection for visually impaired persons. Journal of Advanced Mechanical Design, Systems and Manufacturing, 10(7).
  89. Jali M.H., Rashid N.A., Kamarudin M.N., Ghazali R., Jaafar H.I., 2016. Linear and nonlinear dynamic modeling of motorized prosthetic hand system. Journal of Theoretical and Applied Information Technology, 93(1), pp. 226-232.
  90. Bakar N.A., Abu-Siada A., 2016. Fuzzy logic approach for transformer remnant life prediction and asset management decision. IEEE Transactions on Dielectrics and Electrical Insulation, 23 (5), pp. 3199-3208.
  91. Zambri M.K.M., Aras M.S.M., Khamis A., Hairi M.H., 2016. Investigating the impact of photovoltaic connection to the Malaysian distribution system. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 23-28.
  92. Hussien S.Y.S., Ghazali R., Jaafar H.I., Soon C.C., 2016. Analysis of 3D gantry crane system by PID and VSC for positioning trolley and oscillation reduction. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 139-143.
  93. Tan M.H., Chong S.H., Tang T.F., Shukor A.Z., Sakthivelu V., Ma T.C., Nawawi M.R.Md., 2016. Tracking control of vertical pneumatic artificial muscle system using PID. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 129-132.
  94. Nor A.F.M., Sulaiman M., 2016. Voltage stability assessment of power system network using QV and PV modal analysis. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 7-11.
  95. Zawawi T.N.S.T., Abdullah A.R., Shair E.F., Saleh S.M., 2016. Performances comparison of EMG signal analysis for manual lifting using spectrogram. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 29-34.
  96. Ghazali M.Z., Miskon M.F.B., Ali F.B., Bahar D.M.B.B., 2016. Analysis of three-link position control during sit to stand motion. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 77-82.
  97. Jamaluddin M.H., Shukor A.Z., Miskon M.F., AliIbrahim F., Redzuan M.Q.A., 2016. An analysis of sensor placement for vehicle's blind spot detection and warning system. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 101-106.
  98. Mohammed M.Q., Miskon M.F., Bin Bahar M.B., Bin Ali F., 2016. Walking motion trajectory of hip powered orthotic device using quintic polynomial equation. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 151-155.
  99. Mohd Shah H.N., Sulaiman M., Shukor A.Z., Rashid M.Z.Ab., 2016. Vision based identification and detection of initial, mid and end points of weld seams path in Butt-Welding joint using point detector methods. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 57-61.
  100. Hussien S.Y.S., Ghazali R., Jaafar H.I., Soon C.C., 2016. An experimental of 3D gantry crane system in motion control by PID and PD controller via PFPSO optimization. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 133-137.
  101. Zainal I., Aras M.S.M., Kamarudin M.N., Harun M.H., Zambri M.K.M., Khamis A., Kassim A.M., 2016. Design process and hydrodynamic analysis of underwater remotely operated crawler. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 35-39.
  102. Soon C.C., Ghazali R., Jaafar H.I., Hussien S.Y.S., Rozali S.M., Rashid M.Z.A., 2016. Optimization of sliding mode control using particle swarm algorithm for an electro-hydraulic actuator system. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 71-76.
  103. Soon C.C., Ghazali R., Jaafar H.I., Hussien S.Y.S., Rozali S.M., Rashid M.Z.A., 2016. Position tracking optimization for an electro-hydraulic actuator system. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 1-6.
  104. Shafiei N., Harun M.H., Annuar K.A.M., Halim M.F.A., Aras M.S.M., Azahar A.H., 2016. Development of portable air conditioning system using peltier and seebeck effect. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 97-100.
  105. Shair E.F., Abdullah A.R., Tengku Zawawi T.N.S., Ahmad S.A., Mohamad Saleh S., 2016. Auto-segmentation analysis of EMG signal for lifting muscle contraction activities. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 17-22.
  106. Abu Khanipah N.H., Maaspaliza A., Ibrahim Z., Abd Rahim N., 2016. Multi device interleaved DC/DC converter for fuel cell applications. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 41-45.
  107. Abdul Karim K., Abdullah N., Othman M.N., Firdaus R.N., Zulfattah Z.M., Zainal N.Z. ,2016. Quick design of switched reluctance motor and effect of switching angle ANSYS Maxwell. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 107-110.
  108. Firdaus R.N., Zulaika S., Kamalia K., Suhairi R., Aishah M.Z., Othman M.N., Khamis A., 2016. Design a slot-less linear actuator for food processing application. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 87-91.
  109. Abd Halim W., Ganeson S., Azri M., Tengku Azam T.N.A., 2016. Review of multilevel inverter topologies and its applications. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 51-56.
  110. Bin Hj Shukor A.Z., Gopalasamy, Bin Miskon M.F., Bin AliIbrahim F., 2016. Earthquake disaster awareness system. Journal of Telecommunication, Electronic and Computer Engineering, 8(7), pp. 145-149.
  111. Jidin A., Sanusi S., Sutikno T., Idris N.R.N., 2016. Improved output voltage quality using space vector modulation for multilevel inverters. Telkomnika (Telecommunication Computing Electronics and Control), 14(2), pp. 387-389.
  112. Jali M.H., Rashid N.A., Ghazali R., Izzuddin T.A., Aziz E.S.A., 2016. Parameter estimation technique of nonlinear prosthetic hand system. International Journal of Engineering and Technology, 8(5), pp. 2161-2168.
  113. Ghani S.A., Muhamad N.A., Noorden Z.A., Zainuddin H., Mohamad N., 2016. Dielectric strength improvement of natural ester insulation oil: Optimization of mixed antioxidants via two-level factorial design. ARPN Journal of Engineering and Applied Sciences, 11(21), pp. 12798-12803.
  114. Khamis A., Aras M.S.M., Zambri M.K.M., Ghani M.R.A., Rahim M.N.A.B.A., 2016. Analysis of microturbine and battery storage system in grid-connected and off-grid operations. International Review of Automatic Control, 9(5), pp. 269-278.
  115. Daud S., Kadir A.F.A., Gan C.K., Mohamed A., Khatib T., 2016. A comparison of heuristic optimization techniques for optimal placement and sizing of photovoltaic based distributed generation in a distribution system. Solar Energy, 140, pp. 219-226.

 

 

2015

  1. Jali M.H., Ibrahim I.M., Bohari Z.H., Sulaima M.F., Nasir M.N.M., 2015. Classification of arm movement based on upper limb muscle signal for rehabilitation device. Journal of Theoretical and Applied Information Technology, 68(1), pp. 125-137.
  2. Ramli L., Sam Y.M., Mohamed Z., Khairi Aripin M., Fahezal Ismail M., Ramli L., 2015. Composite nonlinear feedback control with multi-objective particle swarm optimization for active front steering system. Jurnal Teknologi, 72(2), pp. 13-20.
  3. Khamis A., Shareef H., Mohamed A., Bizkevelci E., 2015. Islanding detection in a distributed generation integrated power system using phase space technique and probabilistic neural network. Neurocomputing, 148, pp. 587-599.
  4. Jali M.H., Izzuddin T.A., Bohari Z.H., Sarkawi H., Sulaima M.F., Baharom M.F., Bukhari W.M., 2015. Joint torque estimation model of sEMG signal for arm rehabilitation device using artificial neural network techniques. Lecture Notes in Electrical Engineering, 315              , pp. 671-682.
  5. Tan P.H., Gan C.K., 2015       . Methods of lightning protection for the PV power plant. Proceeding - 2013 IEEE Student Conference on Research and Development (SCOReD 2013), pp. 221-226.
  6. Kamarudin M.N., Husain A.R., Ahmad M.N., Mohamed Z., 2015. A universal formula for asymptotic stabilization with bounded controls. International Journal of Electrical and Computer Engineering, 5(1), pp. 111-118.
  7. Tie C.H., Gan C.K., Ibrahim K.A., 2015. Probabilistic impact assessment of electric vehicle charging on malaysia low-voltage distribution networks. Indian Journal of Science and Technology, 8(3), pp. 199-207.
  8.   Ahmadi M.Z.R.Z., Jidin A., Azri M., Rahim K., Sutikno T., 2015. Improved torque control performance in direct torque control using optimal switching vectors. International Journal of Power Electronics and Drive Systems, 5        (3), pp.                441-452.
  9.   Yusoff N.A.M., Karim K.A., Ghani S.A., Sutikno T., Jidin A., 2015. Multiphase transformer modelling using finite element method. International Journal of Power Electronics and Drive Systems, 6(1), pp. 56-64.
  10. Azri, M., Rahim, N.A., Halim, W.A., 2015       . A highly efficient single-phase transformerless H-bridge inverter for reducing leakage ground current in photovoltaic grid-connected system. Electric Power Components and Systems, 43(Oct), pp. 928-938.
  11. Fairus, M.A., Mohamed, Z., Ahmad, M.N., Loi, W.S., 2015. LMI-based multiobjective integral sliding mode control for rotary inverted pendulum system under load variations. Jurnal Teknologi, 73(6), pp. 125-137.
  12. Kamarudin, M.N., Husain, A.R., Ahmad, M.N., Mohamed, Z., 2015. Model and analysis of wind speed profile using artificial neural network - Feasibility study in Peninsular Malaysia. Jurnal Teknologi, 74(1), pp. 77-81                .
  13. Halim W.A., Rahim N.A., Azri M., 2015. Generalized selective harmonic elimination modulation for transistor-clamped H-bridge multilevel inverter. Journal of Power Electronics, 15(4), pp. 964-973.
  14. Mamat, N., Abdul Karim, K., Ibrahim, Z., Sutikno, T., Tarusan, S.A.A., Jidin, A., 2015. Bearingless permanent magnet synchronous motor using independent control. International Journal of Power Electronics and Drive Systems, 6(2), pp. 233-241       .
  15. Hj Shukor A.Z., Miskon M.F., Ibrahim F.A., Md Nor M.K., 2015. Position control of single link underwater robot manipulator. Jurnal Teknologi           , 74(9), pp. 169-173.
  16. Aras M.S.M., Abdullah S.S., Abdul Rahman A.F.N., Hasim N., Azis F.A., Teck L.W., Nor A.S.M., 2015. Depth control of an underwater remotely operated vehicle using neural network predictive control. Jurnal Teknologi, 74(9), pp. 85-93.
  17. Othman, S.M., Rahmat, M.F., Rozali, S.M., Salleh, S., 2015. Review on sliding mode control and its application in electrohydraulic actuator system. Journal of Theoretical and Applied Information Technology, 77(2), pp. 199-208.
  18. Aras M.S.M., Abdul Azis F., Syed Abdul Hamid S.M.S., Daswir S.E., Ali F.A., 2015. Simulating underwater depth environment condition using lighting system design. Jurnal Teknologi, 74(9), pp. 95-103.
  19. Aras M.S.M., Azis F.A., Abdullah S.S., Cong L.D., Teck L.W., Ali F.A., Othman M.N.    , 2015. Study on the effect of shifting 'zero' in output membership function on fuzzy logic controller of the ROV using micro-box interfacing. Jurnal Teknologi, 74(9), pp. 119-128.
  20. Aras M.S.M., Teck L.W., Azis F.A., Nor A.S.M., Hasim N., 2015. Comparison of depth control form surface and bottom set point of an unmanned underwater remotely operated vehicle using PID controller. Jurnal Teknologi, 74(9), pp. 105-111.
  21. Md Ghazaly M., Khang L.T., Piaw C.Y., Kaiji S., 2015. Force optimization of an force artificial muscle actuated underwater probe system using linear motion electrostatic motor. Jurnal Teknologi, 74(9), pp. 191-196.
  22. Wei L.J., Sen L.W., Sani Z.M., 2015. Leap motion underwater robotic arm control. Jurnal Teknologi, 74(9), pp. 153-159.
  23. Miskon M.F., Sobran N.M.M., Ali F., Hj Shukor A.Z., 2015. Spatial habituating self-organizing map. Jurnal Teknologi, 74(9), pp. 183-189.
  24. Yusoff N.A.M., Karim K.A., Ghani S.A., Tarusan S.A.A., 2015. Analysis of multiphase transformer for static load. Jurnal Teknologi, 75(1), pp. 13-18.
  25. Aras, M.S.M., Mohd Zambri, M.K.B., Rashid, M.Z.A., Azis, F.B.A., Khamis, A., 2015. Dynamic mathematical design and modelling of autonomous control of all-terrain vehicles (ATV) using system identification technique based on pitch and yaw stability. International Review of Automatic Control, 8(2), pp. 140-148.
  26. Mohamad, R.T., Zulkefle, A.A., Baharudin, Z.A., Abdul Rahman, A.I., Zainon, M., Mat Hanafiah, M.A., Salim, S.N.S., Abu Shah, I., Ibrahim, M., Adnan, H., Amran, A.C., Ibrahim, I.M., Abdullah, L., Aman, O., Raja Abd Rahman, R.R., Adnan, W.A., 2015. Effect of temperature on 1 micron thick silicon solar cell. International Journal of Applied Engineering Research, 10(11), pp. 29127-29133.
  27. Aras, M.S.M., b Abdullah, S.S., bin Baharin, K.A., Nor, A.S.B.M., Bin Mohd Zambri, M.K., 2015. Model identification of an underwater remotely operated vehicle using system identification approach based on NNPC. International Review of Automatic Control, 8(2), pp. 149-154.
  28. Omar, R., Rasheed, M., Sulaiman, M., Tamijis, M.R., 2015. Modeling and simulation of a three phase multilevel inverter for harmonic reduction based on modified space vector pulse width modulation (SVPWM). Journal of Theoretical and Applied Information Technology, 77(2), pp. 178-189.
  29. Mohamad, R.T., Zulkefle, A.A., Baharudin, Z.A., Abdul Rahman, A.I., Zainon, M., Raja Abd Rahman, R.R., Syed Salim, S.N., Mat Hanafiah, M.A., Abu Shah, I., Ibrahim, M., Nik Remeli, N.M.K.N., 2015. Nonlinear design and performance analysis of an 8/6 switched reluctance motor(SRM). International Journal of Applied Engineering Research, 10(11), pp. 29135-29138.
  30. Rahman, H.A., Majid, M.S., Rezaee Jordehi, A., Chin Kim, G., Hassan, M.Y., O. Fadhl, S., 2015. Operation and control strategies of integrated distributed energy resources: A review. Renewable and Sustainable Energy Reviews, 51, pp. 1412-1420.
  31. Lau, C.Y., Gan, C.K., Baharin, K.A., Sulaima, M.F., 2015. A review on the impacts of passing-clouds on distribution network connected with solar photovoltaic system. International Review of Electrical Engineering, 10(3), pp. 449-457.
  32. Burhan, J., Erlina, Sirojuzilam, Kahar, N.Y., Mohamad, R.T., Zulkefle, A.A., 2015. An analysis of the effects of electrical energy distribution on the economic growth of kota Medan. International Journal of Applied Engineering Research, 10(17), pp. 38271-38273.
  33. Rashid, M.Z.A., Kamarudin, M.N., Sulaiman, M., Aras, M.S.M., Abd Razak, M.S., Nordin, S.K.S., 2015. Control of under actuated - VTOL system using glove controller. ARPN Journal of Engineering and Applied Sciences, 10(15), pp. 6203-6208.
  34. Adnan, W.A.W., Mohamad, R.T., Kareem, S.A., Zulkefle, A.A., Salahudin, M.T., Kamalrudin, M., 2015. Digital Watermarking : Framework for mathematical modeling. International Journal of Applied Engineering Research, 10(17), pp. 38468-38469.
  35. Jali, M.H., Jusoh, N.I.E., Nasir, M.N.M., Izzuddin, T.A., Baharom, M.F., 2015. EMG features reduction using fuzzy C-Means clustering technique. Journal of Theoretical and Applied Information Technology, 79(3), pp. 486-492.
  36. Tengku Zawawi, T.N.S., Abdullah, A.R., Shair, E.F., Halim, I., Mohamad Saleh, S., 2015. EMG signal analysis of fatigue muscle activity in manual lifting. Journal of Electrical Systems, 11(3), pp. 319-325.
  37. Abdulzahra, A.A., Mohamad, R.T., Ghassan, J.K., Ali, K.S., Saif, T.H., Hadi, F.H., Ahmed, D.S., Shahril, S.H.M., Zulkefle, A.A., Omar, R., Adnan, W.A.W., 2015. Harmonic distortion control technique in adjustable speed drives. International Journal of Applied Engineering Research, 10(17), pp. 38500-38503.
  38. Ghassan, J.K., Mohamad, R.T., Abdulzahra, A.A., Ali, K.S., Saif, T.H., Hadi, F.H., Ahmed, D.S., Zulkefle, A.A., Ab Ghani, M.R., Omar, R., Sulaiman, M., Adnan, W.A.W., 2015. Modeling water treatment plant with high efficiency motors (HEMs). International Journal of Applied Engineering Research, 10(17), pp. 38498-38499.
  39. Abdullah, A.R., Kasim, R., Selamat, N.A., Ramli, M.Z., 2015. Nickel-metal hydride battery analysis using spectrogram. ARPN Journal of Engineering and Applied Sciences, 10(15), pp. 6448-6452.
  40. Bohari, Z.H., Azemy, H.S., Nasir, M.N.M., Baharom, M.F., Sulaima, M.F., Jali, M.H., 2015. Reliable short term load forecasting using self-organizing map (SOM) in deregulated electricity market. Journal of Theoretical and Applied Information Technology, 79(3), pp. 389-394.
  41. Baharom, M.F., Emran, A., Rahman, A.A.B., Sulaima, M.F., Bohari, Z.H., Jali, M.H.     , 2015. A new construction for residential building (hostel) by focusing on green building strategies. Journal of Theoretical and Applied Information Technology, 80(1), pp. 114-123.
  42. Aras, M.S.M., Abdullah, S.S., Azis, F.A., Zambri, M.K.M., Basar, M.F., 2015. Auto depth control for underwater remotely operated vehicles using a flexible ballast tank system. Journal of Telecommunication, Electronic and Computer Engineering, 7(1), pp. 57-64.
  43. Aras, M.S.M., Abdullah, S.S., Azis, F.A., 2015. Review on auto-depth control system for an unmanned underwater remotely operated vehicle (ROV) using intelligent controller. Journal of Telecommunication, Electronic and Computer Engineering, 7(1), pp. 47-55.
  44. Che Razali, M., Abdul Wahab, N., Balaguer, P., Rahmat, M.F., Samsudin, S.I., 2015. Singularly Perturbation Method Applied to Multivariable PID Controller Design. Mathematical Problems in Engineering.
  45. Shamsudin, N.H., Misdar, N.A., Abdullah, A.R., Basir, M.S.S.M., Selamat, N.A., 2015. Speed warning system using solar power. Journal of Theoretical and Applied Information Technology, 80(3), pp. 431-438.
  46. Karim, K.A., Mohd Yusoff, N.A., Jidin, A., Patkar, F., Firdaus, R.N., Mohd Jamil, M.L., 2015. Analysis of five-phase induction motor with dynamic load. ARPN Journal of Engineering and Applied Sciences, 10(20), pp. 830-9834.
  47. Norizan, M.A., Ali, F., Abas, N., Jamaluddin, H., Bukhari, W.M., Borhan, M.A., Baharom, M.F., Nor, A.S.M., 2015. Electromyography circuit based on forearm muscle. Journal of Theoretical and Applied Information Technology, 81(2), pp. 331-336.
  48. Tie, C.H., Gan, C.K., Ibrahim, K.A., Shamshiri, M., 2015. Probabilistic evaluation of the impact of residential photovoltaic system on Malaysia low-voltage network using Monte Carlo approach. Journal of Renewable and Sustainable Energy, 7(6).
  49. Jali, M.H., Izzuddin, T.A., Ghazali, R., Mustafa, N.E.S., Jaafar, H.I., Sarkawi, H., 2015. System identification modeling of arm rehabilitation devices. Journal of Theoretical and Applied Information Technology, 81(3), pp. 547-551.
  50. Jali, M.H., Mustafa, N.E.S., Izzuddin, T.A., Ghazali, R., Jaafar, H.I., 2015. ANFIS-PID controller for arm rehabilitation device. International Journal of Engineering and Technology, 7(5), pp. 1589-1597.
  51. Ali, F., Jamaluddin, H., Abas, N., Miskon, M.F., Shukor, A.Z., Norizan, M.A., Juhari, M.F., 2015. Design and construction of RH2000 cybernatics hand. Jurnal Teknologi, 77(20), pp. 121-125.
  52. Miskon, M.F., Kanzal, S.M.O., Jamaluddin, M.H., Shukor, A.Z., Ali, F., 2015. Design and development of lead-through programming method using low cost incremental encoder feedback. Jurnal Teknologi, 77(20), pp. 83-90.
  53. Kassim, A.M., Aras, M.S.M., Shukor, A.Z., Jaafar, H.I., Rashid, M.Z.A., Baharom, M.F., Jafar, F.A., 2015. Development and evaluation of two- parallel crawler robot by using proportional controller. Jurnal Teknologi, 77(20), pp. 39-45.
  54. Miskon, M.F., Ghazali, M.Z., Bahar, M.B., Lin, C.X., Ali, F., 2015. Feasibility study of using telescopic inverted pendulum model to represent a three link system for sit to stand motion. Jurnal Teknologi, 77(20), pp. 75-81.
  55. Soon, C.C., Ghazali, R., Jaafar, H.I., Hussien, S.Y.S., 2015. PID controller tuning optimization using gradient descent technique for an electro-hydraulic servo system. Jurnal Teknologi, 77(21), pp. 33-39.
  56. Hussien, S.Y.S., Ghazali, R., Jaafar, H.I., Soon, C.C., 2015. The effects on sway angle performance in gantry crane system by using PSD analysis. Jurnal Teknologi, 77(21), pp. 125-131.
  57. Kassim, A.M., Yasuno, T., Aras, M.S.M., Shukor, A.Z., Jaafar, H.I., Baharom, M.F., Jafar, F.A., 2015. Vision based of tactile paving detection method in navigation system for blind person. Jurnal Teknologi, 77(20), pp. 25-32.
  58. Wei, L.J., Hj Shukor, A.Z., Jamaluddin, M.H., 2015. Workspace control of two link planar robot using micro-box 2000. Jurnal Teknologi, 77(20), pp. 9-18.
  59. Sulaima, M.F., Nasir, M.N.M., Shamsudin, N.H., Sulaiman, M., Dahalan, W.M., 2015. Implementation of modified EPSO technique in 69kV distribution network reconfiguration for losses reduction. International Journal of Engineering and Technology, 7(2), pp. 502-509.
  60. Sulaiman, M., Nor, A.F.M., Bujal, N.R., 2015. Voltage instability analysis on PV and QV curves for radial-type and mesh-type electrical power networks. International Review of Electrical Engineering, 10(1), pp. 109-115.
  61. Baharudin N.H., Mansur T.M.N.T., Hassan S.I.S., Saad P., Ali R., Lada M.Y.    , 2015. A comparison of distribution static synchronous compensator (dstatcom) control algorithms for harmonic elimination. ARPN Journal of Engineering and Applied Sciences, 10(22), pp. 10740-10744.
  62. Ismail M.F., Peng K., Sam Y.M., Sudin S., Ramli L., Aripin M.K., Ghazali R., 2015. A reduce chattering problem using composite nonlinear feedback and proportional integral sliding mode control. 2015 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World (ASCC 2015).
  63. Alias N.F., Jidin A., Ismail H., Firdaus R.N., Rahim M.K., Razi A., Halim W.A., 2015. A simple potential balancing strategy for neutral-point-clamped inverter fed direct torque control induction machines. Proceedings of the International Conference on Power Electronics and Drive Systems               2015, August, pp. 1002-1006.
  64. Amin A.F.M., Rahman A.I.A., Salim S.N.S., Aris I.B., Suliaman M.S., Mohamad R.T., Zulkefle A.A., 2015. Cost effective remote monitoring for mini hybrid automation system. International Journal of Applied Engineering Research, 10(23), pp. 43663-43668.
  65. Mohd Jamil M.L., Zolkapli Z.Z., Jidin A., Raja Othman R.N.F., Sutikno T., 2015. Electromagnetic performance due to tooth-tip design in fractional-slot PM brushless machines. International Journal of Power Electronics and Drive Systems, 6(4), pp. 860-868.
  66. Sanusi S., Jidin A., Sutikno T., Karim K.A., Jamil M.L.M., Tarusan S.A.A., 2015. Implementation of space vector modulator for cascaded h-bridge multilevel inverters. International Journal of Power Electronics and Drive Systems, 6(4), pp. 906-918.
  67. Nasir M.N.M., Saharuddin N.Z., Sulaima M.F., Jali M.H., Bukhari W.M., Bohari Z.H., Yahaya M.S., 2015. Performance evaluation of stand-alone hybrid PV-wind generator. AIP Conference Proceedings, p. 1660.
  68. Mohd Jamil M.L., Al-Habshi S.M.S.A., Othman M.N., Sutikno T., 2015. Performance of fractional-slot winding PM machines due to Un-even coil turns and asymmetric design of stator teeth. International Journal of Power Electronics and Drive Systems, 6(4), pp. 853-859.
  69. Ghani S.A., Muhamad N.A., Zainuddin H., 2015. Performance of palm shell activated carbon as an alternative adsorbent for reclamation of used transformer oil. ARPN Journal of Engineering and Applied Sciences, 10(22), pp. 10752-10758.
  70. Ong A.T., Mustapha A., Ibrahim Z.B., Ramli S., Eong B.C., 2015. Real-time automatic inspection system for the classification of PCB flux defects. American Journal of Engineering and Applied Sciences, 8(4), pp. 504-518.
  71. Aras M.S.M., Azis F.A., Teck L.W., Abdullah S.S., Rahman A.F.N.A., 2015. System identification of a prototype small scale ROV for depth control. 2015 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World ( ASCC 2015).
  72. Jamaluddin M.H., Seng C.S., Shukor A.Z., Ibrahim F.A., Miskon M.F., Aras M.S.M., Ghazaly M.M., Ranom R., 2015. The effectiveness of fish length measurement system using non-contact measuring approach. Jurnal Teknologi, 77(20), pp. 67-74.
  73. Ali N.M., Karis M.S., Abidin A.F.Z., Bakri B., Shair E.F., Razif N.R.A., 2015. Traffic sign detection and recognition: Review and analysis. Jurnal Teknologi, 77(20), pp. 107-113.
  74. Aras M.S.M., Zambri M.K.M., Azis F.A., Rashid M.Z.A., Kamarudin M.N., 2015. System identification modelling based on modification of all terrain vehicle (ATV) using wireless control system. Journal of Mechanical Engineering and Sciences, 9, pp. 1640-1654.
  75. Baharom M.F., Ahmad K., Nasir M.N.M., Bukhari W.M., Jaafar H.I., 2015. New construction for commercial building (restaurant) by considering the green building strategies. International Journal of Engineering and Technology, 7(4), pp. 1329-1342.

 

 

Proceeding Paper

 

 

2018

RIA 

  1. Shazali S.M., Development of Handheld Haptics Device for Driving System of Unmanned Underwater Vehicles, 2018. MATEC Web of Conferences, 150, 6033.
  2. Mansor N.N., Jamaluddin M.H., Shukor A.Z., Lok C.C., A Study of Accuracy and Time Delay for Bilateral Master-Slave Industrial Robotic Arm Manipulator System, 2018. MATEC Web of Conferences, 150, 1015.

 

 

EPS 

  1. Rahim, N.A.A.,  Ranom, R.,  Zainuddin, H., Mechanism of the free charge carrier generation in the dielectric breakdown, 2018. Journal of Physics: Conference Series, 949(1), 17426588. 

 

 

PED

  1. n/a

 

 

REAT 

  1. Mohammed S., Chee Soon C., Ghazali R., Yusof A.A., Md Sam Y., Mau Shern C., An Electro-Hydraulic Servo with Intelligent Control Strategy, 2018. MATEC Web of Conferences, 150, 1016.
  2. Ghazali R., Soon C.C., Hassan S.N.S., Sulaiman N., Design and development of therapeutic aid tools using human-machine interaction approach for children with autism spectrum disorder, 2018, Advances in Intelligent Systems and Computing, 739, 530-537.

 

 

2017

RIA 

  1. Rashid M.Z.A., Shah H.N.M., Nazri Othman M., Alandoli E.A.A., Mohd Aras S., Sulaiman M., Latif M.F.A., Parameter Estimation and Verification of Unmanned Air Cushion Vehicle (UACV) System, 2017. MATEC Web of Conferences, 97, 1069.
  2. Saadon I.M., Windiarti H., Othman M.N., Ahmad E.Z., Annuar K.A.M., River Debris Management System using Off-Grid Photovoltaic Module, 2017. MATEC Web of Conferences, 97, 1070.
  3. Tang T.F., Chong S.H., Chan C.Y., Sakthivelu V., Point-to-point positioning control of a pneumatic muscle actuated system using improved-PID control, 2017, Proceedings - 2016 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2016, pp. 45-50.
  4.  Yuden M.A.M., Ghazaly M.M., Jamaludin I.W., Amran A.C., Abdullah Z., Optimization design and analysis of an underactuated dexterous robotic hand system, 2017. Proceedings of 2016 International Conference on Robotics, Automation and Sciences, ICORAS 2016.
  5. Aras M.S.M., Kamarudin M.N., Zainal I., Aziri H., Zambri M.K.M., Kasno M.A., Rashid M.Z.A., Shah H.N.M., Analysis of integrated sensors for unmanned underwater vehicle application, 2017. USYS 2016 - 2016 IEEE 6th International Conference on Underwater System Technology: Theory and Applications, pp. 224-229.
  6. Aras M.S.M., Mazlan K., Ahmad A., Ali N.M., Karis M.S., Khamis A., Zambri M.K.M., Kasno M.A., Azmi M.W.N., Analysis performances of Laser Range Finder and blue LED for Autonomous Underwater Vehicle (AUV), 2017. USYS 2016 - 2016 IEEE 6th International Conference on Underwater System Technology: Theory and Applications, pp. 171-176.
  7. Malik Z.A., Jamaluddin M.H., Shukor A.Z.H., A review of haptic communication technology based on bilateral teleoperation system, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 506-510.
  8. Murad N.S.F.M., Kamarudin M.N., Rozali S.M., Hairi M.H., Achieving optimum tip-speed-ratio of a two-mass wind turbine system, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 757-762.
  9. Tang T.F., Chong S.H., Practical controller design for ultra-precision positioning of stages with a pneumatic artificial muscle actuator, 2017. IOP Conference Series: Materials Science and Engineering, 210 (1), pp. 1-13.
  10. Hasim N., Chong S.H., Hee W.K., Ibrahim Z., Contouring control of ball screw mechanism using a practical control method, 2017. IOP Conference Series: Materials Science and Engineering, 210 (1), 12053.
  11. Kamarudin M.N., Mohd Shaharudin N., Jali M.H., Md. Rozali S., Mohd Aras M.S., Achieving thermal power system stability using load frequency controller, 2017. Communications in Computer and Information Science, 751, pp. 455-467.
  12. Md Rozali S., Farhana N.S., Kamarudin M.N., Abidin A.F.Z., Rahmat M.F., Husain A.R., Soon C.C., Robust control design of nonlinear system via backstepping-PSO with sliding mode techniques, 2017. Communications in Computer and Information Science, 751, pp. 27-37.
  13. Yeo C.K., Ghazaly M.M., Chong S.H., Jamaludin I.W., Design of a high force density tubular linear switched reluctance actuator (TLSRA) without permanent magnet, 2017. Communications in Computer and Information Science, 752, pp. 138-148.
  14. Hasim N., Chong S.-H., Ibrahim Z., CM NCTF with velocity feedforward controller design for tracking control of an AC driven X-Y ball screw mechanism, 2017. Communications in Computer and Information Science, 752, pp. 149-159.
  15. Jaafar H.I., Mohamed Z., PSO-tuned PID controller for a nonlinear double-pendulum crane system, 2017. Communications in Computer and Information Science, 752, pp. 203-215.
  16. Ismail M.F., Sam Y.M., Sudin S., Peng K., Aripin M.K., The effect of matrix C in sliding mode control with composite nonlinear feedback control strategy in MacPherson active suspension system, 2017. Communications in Computer and Information Science, 752, pp. 472-484.
  17. Azmi, MWN; Aras, MSM; Harun, MH, Modelling and control of underwater remotely operated vehicle (ROV) for depth control using system identification, 2017. Proceedings of Mechanical Engineering Research Day 2017 (MERD), pp. 57-59.
  18. Tarmizi, AI; Shukor, AZH; Sobran, NMM; Jamaluddin, MH, Behavior analysis of human walking and robot movement for person following robot, 2017.  Proceedings of Mechanical Engineering Research Day 2017 (MERD), pp. 150-152.
  19. Saadon, IM; Hassanudin, JH; Norddin, N; Hassan, WHW, Off-grid photovoltaic automated river debris collector system, 2017. Proceedings of Mechanical Engineering Research Day 2017 (MERD), pp. 168-169.

 

 

EPS 

  1. Patakor F.A., Jantan N., Salleh Z., Sulaiman M., Auto-tuning sliding mode control for induction motor drives, 2017. 2016 8th Computer Science and Electronic Engineering Conference, CEEC 2016 - Conference Proceedings, pp. 77-82.
  2. Salleh Z., Sulaiman M., Omar R., Patakor F.A., Optimization of fuzzy logic based for vector control induction motor drives, 2017. 2016 8th Computer Science and Electronic Engineering Conference, CEEC 2016 - Conference Proceedings, pp. 83-88.
  3. Ismail R., Baharudin Z.A., A review on basic principle of lightning location in multi-station system and the ability of single-station measurement, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 62-67.
  4. Annathurai V., Gan C.K., Ibrahim K.A., Ghani M.R.A., Technical losses assessment of reference networks in Malaysia, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 280-284.
  5. Daud S., Kadir A.F.A., Gan C.K., Abdullah A.R., Optimal allocation and sizing of photovoltaic-based distributed generation for voltage dip improvement, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 89-94.
  6. Mohamad M.S., Zainuddin H., Ghani S.A., Chairul I.S., Breakdown and partial discharge performance of Palm Fatty Acid Ester (PFAE) oil-based Fe3O4 nanofluids, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 317-321.
  7. Razak I.A.W.A., Abidin I.Z., Yap K.S., Abidin A.A.Z., Rahman T.K.A., Nasir M.N.M., A novel hybrid method of LSSVM-GA with multiple stage optimization for electricity price forecasting, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 390-395.
  8. Kamarudin M.S., Zainuddin H., Haddad A., Abd-Rahman R., Radzi N.H., Ponniran A., Zahari A., Purpose-built test rig for gas insulation breakdown tests under lightning impulse, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 333-337.
  9. Ali N.N., Aman A., Zainuddin H., Ghani S.A., Razak J.A., Two level factorial and optimization studies of Silicon Rubber surface resistivity for high voltage insulation - Effects of raw materials and internal mixer processing parameters, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 295-300.
  10. Zainoddin M.H.S., Zainuddin H., Aman A., Effects of viscosity of ester oils and different sizes of suspended cellulose particles on bridging phenomenon under non-uniform DC electric field, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 285-289.
  11. Shari N.S., Hairi M.H., Kamarudin M.N., PV generation and its impact on low voltage network, PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 338-343.
  12. Bakar N.A., Abu-Siada A., Cui H., Li S., Improvement of DGA interpretation using scoring index method, 2017. ICEMPE 2017 - 1st International Conference on Electrical Materials and Power Equipment, pp. 502-506.
  13. Norhan S.N., Zainuddin H., Ghani S.A., Chairul I.S., Dielectric breakdown performance of mineral oil and palm fatty acid ester oil mixture blended using ultrasonic homogenizer, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 322-326.
  14. Aziri H., Patakor F.A., Sulaiman M., Salleh Z., Simulation of three-phase induction motor drives using indirect field oriented control in PSIM environment, 2017. AIP Conference Proceedings, 1883, 20045.
  15. Zainoddin, MHS; Zainudin, H; Abu Bakar, N, Particles influence on breakdown voltage of liquid insulating medium, 2017. Proceedings of Mechanical Engineering Research Day 2017 (MERD), pp. 146-147.

 

 

PED

  1. Sundram R., Jidin A., Binti Razi A., Tarusan S.A.B.A., Rahim M.K., A novel Hexagonal Flux control method to improve constant switching performance of multilevel 3-phase DTC, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 216-221.
  2. Binti Alias A., Binti Azri M., Bin Jidin A., Binti Abdul Halim W., A modified PID controller of SEPIC converter for excellent dynamic performance, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 423-427.
  3. Lazi J.M., Ibrahim Z., Mat Isa S.N., Razali A.M., Rasin Z., Kamisman N., Fuzzy logic controller of PMSM for sensorless drives, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 540-545.
  4. Talib M.H.N., Isa S.N.M., Hamidon H.E., Ibrahim Z., Rasin Z., Hysteresis current control of induction motor drives using dSPACE DSP controller, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 522-527.
  5. Rahim M.K., Jidin A., Tarusan S.A., Razi A., Sundram R., Ismail H., Constant switching frequency using proposed controller with optimal DTC switching strategy for dual-inverter supplied drive, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 199-204.
  6. Talib M.H.N., Ibrahim Z., Rasin Z., Lazi J.M., Isa S.N.M., Simplified self-tuning Fuzzy Logic Speed controller for induction motor drive, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 188-193.
  7. Razali A.M., Kamisman N., Lazi J.M., Bahari N., Halim W.A., Differential evolution technique in solving HEPWM switching angles of three-phase voltage source inverter, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 489-494.
  8. Tarusan S.A.A., Jidin A., Huzainirah I., Rahim M.K., Karim K.A., DTC brushless DC motor by using constant switching frequency, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 205-209.
  9. Ismail H., Jidin A., Patkar F., Tarusan S.A., Razi A., Rahim M.K., Constant switching frequency torque controller for DTC of induction motor drives with three-level NPC inverter, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, 210-215.
  10. Firdaus R.N., Zulaika S., Aishah M.Z., Othman M.N., Khamis A., Azhar F., Suhairi R., Effect of slot-width in slot-type linear motor, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 797-801.
  11. Azri M., Khanipah N.H.A., Nasir M.A.M., Ibrahim Z., Alias A., Rahim N.A., Hardware in the Loop (HIL) simulation of Multi Device Interleaved Boost Converter (MDIBC), 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 155-159.
  12. Azhar F., Nasir N.A.M., Firdaus R.N., Wakiwaka H., Tashiro K., Nirei M., Comparison and prediction of performance index of permanent magnet linear motor, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 558-563.
  13. Norhisam M., Umira S.N., Firdaus R.N., Yoshino K., Maeda K., Hanamoto T., Characteristic of double-stator PM machine for modular type power train in electric vehicles, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 786-791.
  14. Muhammad M., Rasin Z., Jidin A., Implementation of Carrier-Based Simple Boost Pulse Width Modulation (PWM) for Z-Source Inverter (ZSI) using Field Programming Gate Array (FPGA), 2017. IOP Conference Series: Materials Science and Engineering, 226 (1), 12141.
  15. Mubin A.N.A., Bahrom M.H., Azri M., Ibrahim Z., Rahim N.A., Raihan S.R.S., Analysis performance of proton exchange membrane fuel cell (PEMFC), 2017. IOP Conference Series: Materials Science and Engineering, 210 (1), 12052.
  16. Mohd Nasir N.A., Abdul Shukor F.A., Raja Othman R.N.F.K., Wakiwaka H., Tashiro K., Design of permanent magnet linear synchronous motor stator to improve magnetic flux density profile toward high thrust density performance, 2017. Communications in Computer and Information Science, 751, pp. 443-454.
  17. Yaakub, MF; Abdullah, S; Basar, MF; Noh, FHM; Harun, MH; Halim, MFMA, Energy conversion: A study on rainfall's gravitational force for urban area power generation, 2017. Proceedings of Mechanical Engineering Research Day 2017 (MERD), pp. 166-167.

 

 

REAT 

  1. Soon C.C., Ghazali R., Jaafar H.I., Hussien S.Y.S., Sliding Mode Controller Design with Optimized PID Sliding Surface Using Particle Swarm Algorithm, 2017. Procedia Computer Science, 105, pp. 235-239.
  2. Burhan N., Kasno M., Ghazali R., Feature extraction of surface electromyography (sEMG) and signal processing technique in wavelet transform: A review, 2017. Proceedings - 2016 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2016, pp. 141-146.
  3. Kasno M.A., Aras M.S.M., Ali N.M., Karis M.S., Khamis A., Zambri M.K.M., Harun M.H., Rusli A.F.H., Performances analysis of underwater Remotely Amphibian Vehicle (RAV), 2017. USYS 2016 - 2016 IEEE 6th International Conference on Underwater System Technology: Theory and Applications, pp. 212-217.
  4. Kassim N.M., Abdullah A.R., Kadir A.F.A., Jopri M.H., Shamsudin N.H., Performance verification of real-time harmonic sources identification system, 2017. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding, pp. 350-355.
  5. Soon C.C., Ghazali R., Zaafar H.I., Rozali S.M., Sam Y.M., Rahmat M.F., The effects of pressure variation in sliding mode controller with optimized PID sliding surface, 2017. Communications in Computer and Information Science, 752, pp. 104-115.
  6. Bukhari W.M., Wong C.Y., Yahaya A.B., Bohari Z.H., Sulaima M.F., Jali M.H., Autonomous mobile wheelchair powered via EOG signal recognition, 2017. ISIEA 2014 - 2014 IEEE Symposium on Industrial Electronics and Applications, pp. 54-59.
  7. Burhan, N; Ghazali, R; Kasno, MA; Jali, MH, Electromyography signals analysis using wavelet transform approach for resistance band rehabilitation, 2017. Proceedings of Mechanical Engineering Research Day 2017 (MERD), pp. 99-100.
  8. Abd Latif, MJ; Ibramsa, RS; Saad, NHM, Parametric study of low-field magnetic resonance imaging of articular cartilage in synovial joint, 2017. Proceedings of Mechanical Engineering Research Day 2017 (MERD), pp. 364-365.
  9. Hussien, SYS; Ghazali, R; Jaafar, HI; Soon, CC, PID-VSC controller tuning optimization with PFPSO for 3D gantry crane system, 2017. Proceedings of Mechanical Engineering Research Day 2017 (MERD), pp. 452-453.

 

 

2016

  1. Abu Bakar N., Abu-Siada A., 2016. A novel method of measuring transformer oil interfacial tension using UV-Vis spectroscopy. IEEE Electrical Insulation Magazine, 32(1), pp. 7-13.
  2. Rasin Z., Rahman M.F., 2016. Control of bidirectional DC-DC converter for battery storage system in grid-connected quasi-Z-source PV inverter. 2015 IEEE Conference on Energy Conversion (CENCON 2015),  pp. 205-210.
  3. Razali A.M., Kamisman N., Lazi J.M., Bahari N., 2016. HEPWM using differential evolution technique for three phase voltage source inverter. 2015 IEEE Conference on Energy Conversion (CENCON 2015), pp. 325-330.
  4. Al Ramahlingam S., Bin Jidin A., Alias A.B., Raj L.R.L.V., Razi A.B., 2016. Improved torque control performances using Torque Error Modulator for Multilevel Inverter based DTC induction motors. 2015 IEEE Conference on Energy Conversion (CENCON 2015), pp. 1-6.
  5. Lazi J.M., Ibrahim Z., Sulaiman M., Razali A.M., Kamisman N., 2016. Independent control for dual-PMSM drives using Five-Leg Inverter. 2015 IEEE Conference on Energy Conversion (CENCON 2015), pp. 143-148.
  6. Salam Z., Ramli M.Z., Ahmed J., 2016. Comparative study of software and hardware solutions for partial shading in PV system. 2015 IEEE Conference on Energy Conversion (CENCON 2015), pp. 480-485.
  7. Salim N.B., Tsuji T., Oyama T., Uchida K.,      2016. Interface flow limit identification using focused time delay network for MEPS transmission. Proceedings of the 2015 IEEE Innovative Smart Grid Technologies – Asia (ISGT ASIA 2015).
  8. Rasin Z., Rahman M.F., 2016. Control of bidirectional DC-DC converter for battery storage system in grid-connected quasi-Z-source PV inverter. 2015 IEEE Conference on Energy Conversion (CENCON 2015),  pp. 205-210.
  9. Razali A.M., Kamisman N., Lazi J.M., Bahari N., 2016. HEPWM using differential evolution technique for three phase voltage source inverter. 2015 IEEE Conference on Energy Conversion (CENCON 2015), pp. 325-330.
  10. Al Ramahlingam S., Bin Jidin A., Alias A.B., Raj L.R.L.V., Razi A.B., 2016. Improved torque control performances using Torque Error Modulator for Multilevel Inverter based DTC induction motors. 2015 IEEE Conference on Energy Conversion (CENCON 2015), pp. 1-6.
  11. Lazi J.M., Ibrahim Z., Sulaiman M., Razali A.M., Kamisman N., 2016. Independent control for dual-PMSM drives using Five-Leg Inverter. 2015 IEEE Conference on Energy Conversion (CENCON 2015), pp. 143-148.
  12. Sardi J., Mithulananthan N., Hung D.Q., 2016. A loss sensitivity factor method for locating ES in a distribution system with PV units. Asia-Pacific Power and Energy Engineering Conference (APPEEC 2016),  January.
  13. Tarusan S.A., Tarmizi Y., Jidin A., Karim K.A., Ismail H., Sundram R., Rahim M.K., 2016. Constant switching frequency for Direct Torque Control of induction motor. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 228-233.
  14. Tarmizi Y., Jidin A., Karim K., Tarusan S.A., Rahim M.K., Sundram R., Ismail H., 2016. Investigation of torque and flux-current producing components in indirect rotor flux oriented control (IRFOC) of induction machines. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 539-544.
  15. Rahim M.K., Jidin A., Patkar F., Sundram R., Tarmizi Y., Ismail H., Tarusan S.A., 2016. Minimization of torque ripple and switching frequency utilizing optimal DTC switching strategy for dual-inverter supplied drive. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 49-54.
  16. Ismail H., Patkar F., Jidin A., Sundram R., Rahim M.K., Tarmizi Y., Razi A., 2016. Direct Torque Control of induction machine using 3-level neutral point clamped inverter. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 571-576.
  17. Sundram R., Jidin A.B., Razi A.B., Rahim M.K., Ismail H., Tarmizi Y., Raj L.L., 2016. Improve torque control performance of 3-phase DTC constant switching method using optimal PI parameter tuning strategy. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 577-582.
  18. Daud S., Kadir A.F.A., Gan C.K., 2016. The impacts of distributed Photovoltaic generation on power distribution networks losses. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 11-15.
  19. Ibrahim K.A.B., Au M.T., Gan C.K., 2016. Generic characteristic of medium voltage reference network for the Malaysian power distribution system. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 204-209.
  20. Mohamad M.H., Sali A., Ibrahim N.S., Hashim F., Nordin R., 2016. Temporal evaluation of secondary user interference to primary user in cognitive radio networks. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 565-570.
  21. Mohamad M.S., Zainuddin H., Ghani S.A., Chairul I.S., 2016. AC breakdown voltage of natural ester mixed with Iron Oxide for oil-immersed power transformer application. 2015 IEEE Student Conference on Research and Development (SCOReD 2015), pp. 160-20.
  22. Sani Z.M., Sen L.W., Ghani H.A., Besar R., 2016. Real-time daytime road marker recognition using features vectors and neural network. 2015 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology (CSUDET 2015), pp. 38-43.
  23. Chong S.-H., Sato K., 2016. Nominal characteristics trajectory following control as practical controller: A review. IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, p. 4795
  24. Said N.A.M., Xiao D., Dutta R., Fletcher J.E., 2016. Closed-loop control strategy for PM machines with non-sinusoidal back-EMFs using dual-inverter open-end winding. IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, pp. 2998-3003.
  25. Hussien S.Y.S., Ghazali R., Jaafar H.I., Soon C.C., 2016. Robustness analysis for PID controller optimized using PFPSO for underactuated gantry crane system. Proceedings - 5th IEEE International Conference on Control System, Computing and Engineering(ICCSCE 2015), pp. 520-525.
  26. Jali M.H., Izzuddin T.A., Bohari Z.H., Jaafar H.I., Nasir M.N.M., 2016. Pattern recognition of EMG signal during load lifting using Artificial Neural Network (ANN). Proceedings - 5th IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2015), pp. 172-177.
  27. Izzuddin T.A., Ariffin M.A., Bohari Z.H., Ghazali R., Jali M.H., 2016. Movement intention detection using neural network for quadriplegic assistive machine. Proceedings - 5th IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2015), pp. 275-280.
  28. Bohari Z.H., Jali M.H., Baharom M.F., Nasir M.N.M., Fariz N.M., Thayoob Y.H.M., 2016. Transformer mechanical integrity evaluation via unsupervised neural network (UNN) in smart grid network. Proceedings - 5th IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2015), pp. 167-171.
  29. Ali N.M., Jun S.W., Karis M.S., Ghazaly M.M., Aras M.S.M., 2016. Object classification and recognition using Bag-of-Words (BoW) model. Proceeding - 2016 IEEE 12th International Colloquium on Signal Processing and its Applications (CSPA 2016), pp. 216-220.
  30. Karis M.S., Razif N.R.A., Ali N.M., Rosli M.A., Aras M.S.M., Ghazaly M.M., 2016. Local Binary Pattern (LBP) with application to variant object detection: A survey and method. Proceeding - 2016 IEEE 12th International Colloquium on Signal Processing and its Applications (CSPA 2016), pp. 221-226.
  31. Tarmizi A.I., Rotaru M.D., Sykulski J.K., 2016. Magnetic field calculations within substation environment for EMC studies. Institute of Electrical and Electronics Engineers Inc.
  32. Nordin N., Xie S.-Q., Wunsche B., 2016. Simple torso model for upper limb compensatory assessment after stroke. IEEE/ASME International Conference on Advanced Intelligent Mechatronics, (AIM), September, pp. 775-780.
  33. Ismail M.F., Sam Y.M., Sudin S., Aripin M.K., 2016. A control performance analysis for MacPherson active suspension system under bounce sine sweep road profile. AIP Conference Proceedings, p. 1782.
  34. Ali N.M., Karis M.S., Aziz M.A., Abidin A.F.Z., 2016 .Analysis of frontal face detection performance by using Artificial Neural Network (ANN) and Speed-Up Robust Features (SURF) technique. AIP Conference Proceedings, p. 1774.
  35. Karis M.S.B., Ali N.M., Hisham N.W.B., Abidin A.F.Z., Johan N.F., Razif N.R.A., 2016. An analysis of out-of-plane facial detection using variant dataset among UTEM students by using speed-up robust feature technique. AIP Conference Proceedings, p. 1774.
  36. Karis M.S., Ali N.M., Basar A.M., Jaafar H.I., Abidin A.F.Z., 2016. An analysis on out-of plane face detection among female student and illumination effects using Sift and Surf. AIP Conference Proceedings, p. 1774.
  37. Muda A.F., Saad N.M., Waeleh N., Abdullah A.R., Fen L.Y., 2016. Integration of fuzzy C-means with correlation template and active contour for brain lesion segmentation in diffusion-weighted MRI. Proceedings - AIMS 2015, 3rd International Conference on Artificial Intelligence, Modelling and Simulation, pp. 268-273.
  38. Ghani M.R.A., Farah N., Tamjis M.R., 2016. Vector control of switched reluctance motor using fuzzy logic and artificial neutral network controllers. International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT 2016), pp. 4412-4417.
  39. Ghani M.R.A., Farah N., Tamjis M.R., 2016. Field oriented control of 6/4 SRM for torque ripple minimization. International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT 2016), pp. 4418-4424.
  40. Sardi J., Mithulananthan N., Hung D.Q., 2016. A comprehensive community energy storage planning strategy based on a cost-benefit analysis. Proceedings of the 2016 Australasian Universities Power Engineering Conference(AUPEC 2016).

 

2015

  1. Baharin K.A., Rahman H.A., Hassan M.Y., Kim G.C., 2015. Hourly irradiance forecasting for Peninsular Malaysia using dynamic neural network with preprocessed data. Proceeding - 2013 IEEE Student Conference on Research and Development (SCOReD 2013), pp. 191-197.
  2. Hassan M.A., Abdullah A.R., Bahari N., Jidin A., 2015. Incorporating brushless DC motor in outdoor fan control of low voltage air-conditioning system. Proceeding - 2013 IEEE Student Conference on Research and Development (SCOReD 2013), pp. 550-555.
  3. Musa S.H.A., Abdullah A.R., Rahim N.H., Gan C.K., 2015. Laboratory experiment of compact fluorescent and compact LED lamp for residential area. Proceeding - 2013 IEEE Student Conference on Research and Development (SCOReD 2013), pp. 127-132.
  4. Sakthivelu V., Horng C.S., 2015. Motion control of pneumatic muscle actuator: Experimental setup and modeling. Proceeding - 2013 IEEE Student Conference on Research and Development (SCOReD 2013), pp. 60-64.
  5. Abidullah N.A., Abdullah A.R., Shamsudin N.H., Ahmad N.H.T.H., Jopri M.H., 2015. Real-time power quality signals monitoring system. Proceeding - 2013 IEEE Student Conference on Research and Development (SCOReD 2013), pp. 433-438.
  6. Khiar M.S.A., Ghani S.A., Chairul I.S., Thayoob Y.H.M., Ghazali Y.Z.Y., 2015. On-site OLTC monitoring using duval triangle and DWRM. Proceedings of 2014 2nd International Conference on Technology, Informatics, Management, Engineering and Environment  (TIME-E 2014), pp. 216-221.
  7. Ghani S.A., Ahmad Khiar M.S., Chairul I.S., Lada M.Y., Rahim N.H., 2015. Study of magnetic fields produced by transmission line tower using finite element method (FEM). Proceedings of 2014 2nd International Conference on Technology, Informatics, Management, Engineering and Environment, (TIME-E 2014),         pp. 64-68.
  8. Bakar N.A., Abu-Siada A., Islam S., El-Naggar M.F., 2015. A new technique to measure interfacial tension of transformer oil using UV-Vis spectroscopy. IEEE Transactions on Dielectrics and Electrical Insulation, 22(2), pp. 1275-1282.
  9. Apandi, N.I.A., Hardjawana, W., Vucetic, B., 2015. A distributed cooperative power allocation scheme for small cell networks. 2015 IEEE Wireless Communications and Networking Conference (WCNC 2015), pp. 1882-1887.
  10. Azmi, A.N., Kolhe, M.L., Imenes, A.G., 2015. Review on photovoltaic based active generator. 2015 9th International Symposium on Advanced Topics in Electrical Engineering (ATEE 2015), pp. 812-815.
  11. Apandi, N.I.A., Hardjawana, W., Vucetic, B., 2015. Distributed transmit power management for small cell networks. IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC), 2015(June), pp. 1696-1700.
  12. Sulaima M.F., Shamsudin N.H., Jaafar H.I., Dahalan W.M., Mokhlis H., 2015. A DNR and DG sizing simultaneously by using EPSO. Proceedings - International Conference on Intelligent Systems, Modelling and Simulation (ISMS), September, pp. 405-410.
  13. Sulaima M.F., Othman S.N., Jamri M.S., Omar R., Sulaiman M., 2015. A DNR by using rank evolutionary particle swarm optimization for power loss minimization. Proceedings - International Conference on Intelligent Systems, Modelling and Simulation (ISMS), September                , pp. 417-422.
  14. Blar N., Jafar F.A., Abdullah N., Muhammad M.N., Kassim A.M., 2015. Analysis of human emotion in human-robot interaction. AIP Conference Proceedings, p. 1660.
  15. Bohari Z.H., Baharom M.F., Sulaima M.F., Jali M.H., Jaafar H.I., Jamri M.S., 2015. Assessment of transformer core and winding conditions for distribution transformers using sweep frequency response analysis waveforms. AIP Conference Proceedings, p. 1660.
  16. Selamat N.A., Daud F.S., Jaafar H.I., Shamsudin N.H., 2015. Comparison of LQR and PID controller tuning using PSO for Coupled Tank System. Proceedings - 2015 IEEE 11th International Colloquium on Signal Processing and Its Applications (CSPA 2015), pp. 46-51.
  17. Ghazali R., Sam Y.M., Rahmat M.F., Soon C.C., Jaafar H.I., Zulfatman, 2015. Discrete sliding mode control for a non-minimum phase electro-hydraulic actuator system. 2015 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World (ASCC 2015).
  18. Salam Z., Ramli M.Z., 2015. Distributed maximum power point tracker for additional energy harvesting during partial shading of PV system. 2015 1st Workshop on Smart Grid and Renewable Energy (SGRE 2015).
  19. Bohari Z.H., Yusof M.A.M., Jali M.H., Sulaima M.F., Nasir M.N.M.     , 2015. Feature combination analysis in smart grid based using SOM for Sudan national grid. IOP Conference Series: Materials Science and Engineering, 100(1).
  20. Jali M.H., Ibrahim I.M., Sulaima M.F., Bukhari W.M., Izzuddin T.A., Nasir M.N., 2015. Features extraction of EMG signal using time domain analysis for arm rehabilitation device. AIP Conference Proceedings, p. 1660.
  21. Mariam M.G., Khang L.T., Aliza C.A., Kaiji S., 2015. Force optimization of a linear motion type electrostatic microactuator using finite element method (FEM) analysis for high thrust performances. 2015 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World (ASCC 2015).
  22. Gan C.K., Shamshiri M., Pudjianto D., 2015. Integration of PV system into LV distribution networks with Demand Response application. 2015 IEEE Eindhoven PowerTech (PowerTech 2015).
  23. Subari H., Chong S.-H., Hee W.-K., Chong W.-Y., Nawawi M.R.M., Othman M.N.., 2015. Investigation of model parameter variation for tension control of a multi motor wire winding system. 2015 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World (ASCC 2015).
  24. Khamis A., Shareef H., Mohamed A., 2015. Islanding detection and load shedding scheme for radial distribution systems integrated with dispersed generations. IET Generation, Transmission and Distribution, 9(15), pp. 2261-2275.
  25. Shamsudin N.H., Basir M.S.S.M., Abdullah A.R., Sulaima M.F., Shair E.F., 2015. Losses minimization in network reconfiguration for fault restoration via a uniform crossover of genetic algorithm. 2nd International Symposium on Technology Management and Emerging Technologies, ISTMET 2015 – Proceeding, pp. 330-334.
  26. Firdaus R.N., Suhairi R., Farina S., Karim K.A., Ibrahim Z., 2015. Improvement of power density spoke type Permanent Magnet Generator. Proceedings of the International Conference on Power Electronics and Drive Systems, August, pp. 197-201.
  27. Kamarudin M.N., Husain A.R., Ahmad M.N., Mohamed Z., 2015. Nonlinear stabilization with bounded controller. 2015 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World (ASCC 2015).
  28. Jaafar H.I., Hussien S.Y.S., Ghazali R., Mohamed Z., 2015. Optimal tuning of PID+PD controller by PFS for Gantry Crane System. 2015 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World (ASCC 2015).
  29. Lada M.Y., Khiar M.S.A., Ghani S.A., Nawawi M.R.M., Nor A.S.M., Yuen J.G.M., 2015. Performance analysis of SHE-PWM using Fourier Series and Newton-Raphson analysis. AIP Conference Proceedings, p. 1660.
  30. Bin Mohamed Kassim A., Yasuno T., Jaafar H.I., Aras M.S.M., Abas N., 2015. Performance analysis of wireless warning device for upper body level of deaf-blind person. 2015 54th Annual Conference of the Society of Instrument and Control Engineers of Japan (SICE 2015), pp. 252-257.
  31. Azmi A.N., Kolhe M.L., 2015. Photovoltaic based active generator: Energy control system using stateflow analysis. Proceedings of the International Conference on Power Electronics and Drive Systems, August, pp. 18-22.
  32. Nasir M.N.M., Lada M.Y., Baharom M.F., Jaafar H.I., Ramani A.N., Sulaima M.F., 2015. Photovoltaic-wind hybrid system for permanent magnet DC motor. AIP Conference Proceedings, p. 1660.
  33. Rahim M.K., Patkar F., Jidin A., Ahmadi M.Z.R.Z., Firdaus R.N., Halim W.A., Razi A., 2015. Reduced torque ripple and switching frequency using optimal DTC switching strategy for open-end winding of induction machines. Proceedings of the International Conference on Power Electronics and Drive Systems, August, pp. 767-772.
  34. Miskon M.F.B., Yusof M.B.A.J., 2015. Review of trajectory generation of exoskeleton robots. 2014 IEEE International Symposium on Robotics and Manufacturing Automation (IEEE-ROMA2014), pp. 12-17.
  35. Shair E.F., Zawawi T.N.S.T., Abdullah A.R., Shamsudin N.H., Halim I., 2015. SEMG signals analysis using time-frequency distribution for symmetric and asymmetric lifting. 2nd International Symposium on Technology Management and Emerging Technologies (ISTMET 2015) – Proceeding, pp. 233-237.
  36. Sabri M.I., Miskon M.F., Basri A.S.H., Yaacob M.R., 2015. The study of principle component of the surface electromyography signal of the Bicep Brachii muscle. 2014 IEEE International Symposium on Robotics and Manufacturing Automation (IEEE-ROMA2014), pp. 7-11.
  37. Aripin M.K., Ghazali R., Sam Y.M., Danapalasingam K., Ismail M.F., 2015. Uncertainty modelling and high performance robust controller for active front steering control. 2015 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World (ASCC 2015).
  38. Razali A.M., Rahman M.A., George G., Rahim N.A., 2015. Analysis and Design of New Switching Lookup Table for Virtual Flux Direct Power Control of Grid-Connected Three-Phase PWM AC-DC Converter. IEEE Transactions on Industry Applications, 51(2), pp. 1189-1200.
  39. Hashim N. H., Abd Latiff M. J., Jaafar Y. L., 2015. The effects of contact area and surface curvature on biomechanical behavior of articular cartilage. Proceedings - 2015 2nd International Conference on Biomedical Engineering (ICoBE 2015).
  40. Zawawi T.N.S.T., Abdullah A.R., Shair E.F., Halim I., Rawaida O., 2015. Electromyography signal analysis using spectrogram. Proceeding - 2013 IEEE Student Conference on Research and Development, (SCOReD 2013), pp. 319-324.